Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
Tech Regular
iTrader: (17)
I'm installing the TLR kit in my truck. One of the shock collars are very hard to put on. I actually have to use pliers to get it on its so hard. Is there any reason for this. Also when I put the hinge pins through the aluminum hubs they are tight. Is there any way to ream these other than drilling them? I bought the truck used so I am going through it. I changed the diff fluid in it. It still had the original grease. I noticed that the diff pins had grooves in them from the sun gears, are peas replacing these with the Chris pin set ups?
Thanks Brad
Thanks Brad
I was thinking about getting them just for the bling factor but now for get it.
Happy holidays to all.. get a pro match battery you wont have to wait for that slow boat from china...
Tech Elite
iTrader: (79)
Tech Addict
iTrader: (4)
So Santa just dropped off a few SCTE goodies. What springs are people running with the aftermarket spring kit? Also what swaybars? I also got the TLR tune up kit. What pivots/degree are people running?
Tech Master
iTrader: (24)
R/C Tech Elite Member
iTrader: (198)
Promatch good stuff
My Nano went bad after one use....... Go Promatch! It's just my recomendation!
most people will run black fronts and orange rears, 2.0mm bar up front and 1.8mm bar in the rear. most people run stock settings with the adjustable hinge pin holders (0's all around).
R/C Tech Elite Member
iTrader: (198)
Springs and tuning kit
Have fun !
Tech Master
iTrader: (24)
Heres my losi 5t Inspired paint job, not the greatest, i like it.
I used the Associated Contender body, Fits nicely.
I used the Associated Contender body, Fits nicely.
Tech Addict
iTrader: (4)
Nice paint job!!
Take out the rc10 stickers !! LOL
Take out the rc10 stickers !! LOL
Tech Elite
iTrader: (110)
Hey guys Merry Christmas! I race on carpet and been using 5/5/3 in the diffs. I'm looking for a little more on power steering and a little better rotation in the turns. The way it is now is ok but i know it could be better. Should I go up or down in diff fluid weight? I was thinkin 3/3/2. Has anyone tried this?
wine were chrome