1LikesBMI Racing Discussions
03-31-2004, 10:27 AM
#2326
GT7 in BMI
Hey BMI racers,
I wanted a cleaner wiring on my car so I mounted the NOvak Super schottky diode under the driveshaft by soldering the wires directly onto the solder tabs on the bottom of the ESC. I then mounted the diode under the driveshaft with dbl stick tape.
HEres a pic from the battery side. Looks better than it glued to the top of the ESC or hangin in space!!
Ray
I wanted a cleaner wiring on my car so I mounted the NOvak Super schottky diode under the driveshaft by soldering the wires directly onto the solder tabs on the bottom of the ESC. I then mounted the diode under the driveshaft with dbl stick tape.
HEres a pic from the battery side. Looks better than it glued to the top of the ESC or hangin in space!!
Ray
03-31-2004, 11:42 AM
#2328
Re: Re: Xray chassis
Originally posted by rayhuang
I beleive you get the chassis and upperdeck for $79.99 in black. Colors will be I think $10 more??!! Its 3mm bottom and top.
The front and rear shock tower, battery straps and bumper brace are optional.
Ray
I beleive you get the chassis and upperdeck for $79.99 in black. Colors will be I think $10 more??!! Its 3mm bottom and top.
The front and rear shock tower, battery straps and bumper brace are optional.
Ray
03-31-2004, 12:45 PM
#2329
Pro 4
Jason,
I sent the kit top deck to you next day air
You will have in the a.m. to compare......
Pro 4 racer's... Here is a set up for carpet with foams that has been dialed for me. In stock that is......
Front:
#4 piston w/50 wt. Losi oil
Losi white spring
inside on arm
laid in third hole on tower
camber link is out and shimmed low (2mm spacer)
6 degree caster blocks
.5mm anit-dive
low roll centers
1mm up travel (droop)
kit sway bar
4mm ride height
-1.5 camber
2.5 block (arm sweep)
rear:
#4 piston w/45 wt. Losi oil
Losi black spring or white
middle hole on arm
out on tower
camber link inside shimmed high (4mm)
outside on hub
standard wheel base (large shim in rear)
.5mm anti-squat
low roll centers
1.5mm up travel (droop)
no bar
4mm ride height
-1.5 camber
2.5 toe block
RC-Square .5 rear hubs reversed (total of 2.0 rear toe) Cannot wait for HPI to release the blocks...
BSR purple orange front
BSR purple rear
Tires are same as Jaco
This set up has been very good for me at multiple tracks. I will post more as I find new adjustments...
To note:
BMI 3mm chassis/top deck/shock towers. These are soon to be realeased if not already. I will provide feedback of the stiffer carbon Sunday night after racing. It fixed any tweak issues, is rock solid, and most important beautiful
I sent the kit top deck to you next day air
You will have in the a.m. to compare......Pro 4 racer's... Here is a set up for carpet with foams that has been dialed for me. In stock that is......
Front:
#4 piston w/50 wt. Losi oil
Losi white spring
inside on arm
laid in third hole on tower
camber link is out and shimmed low (2mm spacer)
6 degree caster blocks
.5mm anit-dive
low roll centers
1mm up travel (droop)
kit sway bar
4mm ride height
-1.5 camber
2.5 block (arm sweep)
rear:
#4 piston w/45 wt. Losi oil
Losi black spring or white
middle hole on arm
out on tower
camber link inside shimmed high (4mm)
outside on hub
standard wheel base (large shim in rear)
.5mm anti-squat
low roll centers
1.5mm up travel (droop)
no bar
4mm ride height
-1.5 camber
2.5 toe block
RC-Square .5 rear hubs reversed (total of 2.0 rear toe) Cannot wait for HPI to release the blocks...
BSR purple orange front
BSR purple rear
Tires are same as Jaco
This set up has been very good for me at multiple tracks. I will post more as I find new adjustments...
To note:
BMI 3mm chassis/top deck/shock towers. These are soon to be realeased if not already. I will provide feedback of the stiffer carbon Sunday night after racing. It fixed any tweak issues, is rock solid, and most important beautiful
03-31-2004, 12:51 PM
#2330
RB,
You don't drive a Schuie anymore ?
You don't drive a Schuie anymore ?
03-31-2004, 12:56 PM
#2331
forty6,
No I do not.
Here are some pics!
No I do not.
Here are some pics!
03-31-2004, 12:56 PM
#2332
Another:
03-31-2004, 12:57 PM
#2333
And another:
03-31-2004, 12:57 PM
#2334
Last one:
03-31-2004, 01:01 PM
#2335
Schumacher:
For anyone interested in why I am no longer running the Schumacher. Before rumors start, etc..
The Mi2 is a great car. My car worked pretty good at Snowbirds, but I have struggled a little with it at home. It is just a new car and design and it takes time to get them right. I guess I was not really committed to put that time in right now. Paul Wynn and Schumacher treated me great. They are a stand up group of guys.
Anyone running the Mi2 keep an eye out for the all new P-Dub Racing product line. Going to be killer stuff.
For anyone interested in why I am no longer running the Schumacher. Before rumors start, etc..
The Mi2 is a great car. My car worked pretty good at Snowbirds, but I have struggled a little with it at home. It is just a new car and design and it takes time to get them right. I guess I was not really committed to put that time in right now. Paul Wynn and Schumacher treated me great. They are a stand up group of guys.
Anyone running the Mi2 keep an eye out for the all new P-Dub Racing product line. Going to be killer stuff.
03-31-2004, 02:46 PM
#2336
Hey RB
I got my diode and my capacitor to fit up under there, heres a pic.
I got my diode and my capacitor to fit up under there, heres a pic.
03-31-2004, 10:59 PM
#2339
Ive heard its particularly fast hows that?
