Rc10ntc3
#3961
Tech Adept
springs
Do springs make a big difference? I just bought the 9 pairs because they were on sale ($18), but I still got the rtr plastic shocks.
#3962
Originally posted by drive4fun
Ok.. well ive been having my ntc3 for about a month now and im ready for new hop ups. I am currently bashing right now on streets parking lots and parks. I want to improve my car a lot and dont know what should i do first or what to get first. Its currently stock ntc3 rtr except for the steering servo which i upgrade it thats all ive done so far what should be my next steps in to adding to the car except for hotter engine and new electronics basically graphite titanium gearing shocks? .. etc
what should i do next
thanks
Ok.. well ive been having my ntc3 for about a month now and im ready for new hop ups. I am currently bashing right now on streets parking lots and parks. I want to improve my car a lot and dont know what should i do first or what to get first. Its currently stock ntc3 rtr except for the steering servo which i upgrade it thats all ive done so far what should be my next steps in to adding to the car except for hotter engine and new electronics basically graphite titanium gearing shocks? .. etc
what should i do next
thanks
#3963
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
Re: First real race
Originally posted by CHUCKMANDO
Well guys, I just completed my first real race. What an expirance. I am used to bashing in lots with hoses, but boards are another animal. Tc3 did well. I met FastHarry there and he is a good guy. His car is real nice. Emaculate. Wish mine was as nice. Anyway we both did not bad in the A main and finished 3rd and 4th. Not bad for 2 guys who never raced with boards. Let me tell you, bashing is one thing and it is fun, but try a 1/2 hr straight main, where if you make a mistake it could be the end of the day for you. A whole new level for me. Oh yeah, 235s ran with us, but none made it to the A main for some reason.
Well guys, I just completed my first real race. What an expirance. I am used to bashing in lots with hoses, but boards are another animal. Tc3 did well. I met FastHarry there and he is a good guy. His car is real nice. Emaculate. Wish mine was as nice. Anyway we both did not bad in the A main and finished 3rd and 4th. Not bad for 2 guys who never raced with boards. Let me tell you, bashing is one thing and it is fun, but try a 1/2 hr straight main, where if you make a mistake it could be the end of the day for you. A whole new level for me. Oh yeah, 235s ran with us, but none made it to the A main for some reason.
hey guys...Charles and I had a great time........he got me in the A main ....he's a good,consistant driver....
there were about 30 drivers entered in touring,about 45 in 1/8th..
You all ought to consider making to Edison June 7th and 8th for some good fun.....
#3964
R/C Tech Founder
Hi guys,
I'm looking for some part numbers for stuff I'd like to do to the car.
- Lunsford titanium rear toe links (if these exist, I heard they did)
- hardened hinge pins (from anywhere)
- good bumper (RPM? BRP?)
- whichever spring people use in the swing rack
I think that's all for now. Thanks!
I'm looking for some part numbers for stuff I'd like to do to the car.
- Lunsford titanium rear toe links (if these exist, I heard they did)
- hardened hinge pins (from anywhere)
- good bumper (RPM? BRP?)
- whichever spring people use in the swing rack
I think that's all for now. Thanks!
#3965
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
Originally posted by futureal
Hi guys,
I'm looking for some part numbers for stuff I'd like to do to the car.
- Lunsford titanium rear toe links (if these exist, I heard they did)
- hardened hinge pins (from anywhere)
- good bumper (RPM? BRP?)
- whichever spring people use in the swing rack
I think that's all for now. Thanks!
Hi guys,
I'm looking for some part numbers for stuff I'd like to do to the car.
- Lunsford titanium rear toe links (if these exist, I heard they did)
- hardened hinge pins (from anywhere)
- good bumper (RPM? BRP?)
- whichever spring people use in the swing rack
I think that's all for now. Thanks!
http://www2.towerhobbies.com/cgi-bin...?&I=LXEER1&P=7
http://www2.towerhobbies.com/cgi-bin...?&I=LXCRU0&P=7
http://www2.towerhobbies.com/cgi-bin...?&I=LX2879&P=7
OK?
#3966
Have you seen the latest news concerning "The Fix" ?
http://www.rctech.net/forum/attachme...?postid=368757
http://www.rctech.net/forum/attachme...?postid=368757
#3967
Originally posted by TSR6
Have you seen the latest news concerning "The Fix" ?
http://www.rctech.net/forum/attachme...?postid=368757
Have you seen the latest news concerning "The Fix" ?
http://www.rctech.net/forum/attachme...?postid=368757
#3968
R/C Tech Founder
fastharry: Thanks!
#3969
Tech Adept
iTrader: (2)
Originally posted by TSR6
Have you seen the latest news concerning "The Fix" ?
http://www.rctech.net/forum/attachme...?postid=368757
Have you seen the latest news concerning "The Fix" ?
http://www.rctech.net/forum/attachme...?postid=368757
Man if somebody can send that pic to AE lol
WHAT IS IT SOHARD TO FIX THAT FUEL TANK!!!!!!!!
#3970
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
Originally posted by TSR6
Have you seen the latest news concerning "The Fix" ?
http://www.rctech.net/forum/attachme...?postid=368757
Have you seen the latest news concerning "The Fix" ?
http://www.rctech.net/forum/attachme...?postid=368757
this way,when you get beat by the G4 and hpi r 40,you can get those Mugens right on Ebay..and jump on another belt bandwagon....
#3971
Did you guys see the article on a SuperCharger for R/C cars. in R/C Nitro magazine, pg. 129 in the June issue. I wonder if it "really" works. I doubt it. anyway let me know what you guys have heard about superchargers.
#3972
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
I saw that thing mounted on a tc3 at the WRAM show in feb.....looked interesting..he had a working one on a traxxas truck....the thing that bothered me wasll the extra pressure was REALLY foaming the fuel in the tank....NOT good for the tc3...
the good news is that he is also working on a 4 stroke conversion kit for the tc3..
the good news is that he is also working on a 4 stroke conversion kit for the tc3..
#3973
is it worth getting the titanium pivot balls?
#3974
Tech Adept
Originally posted by alucard13
is it worth getting the titanium pivot balls?
is it worth getting the titanium pivot balls?
#3975
Originally posted by sook
In my opinion, No. The titanium pivot balls bends and breaks just as easily as the steel. I don't waste money on those and just stick with the stock pivot balls. It is however worth the money to protect the pivot balls from the front impact of boards with the RPM bumper plate.
In my opinion, No. The titanium pivot balls bends and breaks just as easily as the steel. I don't waste money on those and just stick with the stock pivot balls. It is however worth the money to protect the pivot balls from the front impact of boards with the RPM bumper plate.