Community
Wiki Posts
Search

RC10B4.1 FT/WC

Thread Tools
 
Search this Thread
 
Old 09-17-2011 | 03:59 PM
  #5956  
Wild Cherry's Avatar
Tech Legend
 
Joined: Aug 2001
Posts: 22,595
From: TRCR Modified Driver
Default

Ryno , in my experience when ever
I encounter a racer with nose dive issues ?

I almost find every time the transmitter has not been adjusted correctly before programing the ESC .


also


See some with the brake adjustment set very high or as hard as the ESC can apply .

hope this helps U
Wild Cherry is offline  
Old 09-17-2011 | 04:08 PM
  #5957  
Tech Rookie
iTrader: (5)
 
Joined: Sep 2011
Posts: 19
Default

Originally Posted by t4mania
Just got my FT B4 along with an extended chassis. How much weight is everyone adding to these with this chassis.
The standard lenght composite chassis weights around 136grams/5oz. The 8mm chassis’s have I modified are around 144grams for the composite chassis and 134grams for the T4 chassis without the circle on the bottom. The newer chassis is a little thinner than the standard.
Jolly03 is offline  
Old 09-17-2011 | 05:35 PM
  #5958  
916bdogg's Avatar
Tech Regular
 
Joined: Mar 2011
Posts: 272
From: Sacramento,CA USA
Default

What if you use this Chassis ,for +8mm? Carbon +8mm chassis!
Attached Thumbnails RC10B4.1 FT/WC-asc7441_1.jpg  
916bdogg is offline  
Old 09-17-2011 | 05:46 PM
  #5959  
Jmuck69's Avatar
Tech Champion
iTrader: (14)
 
Joined: Jan 2010
Posts: 5,061
From: Atlanta, GA.
Default

Originally Posted by 916bdogg
What if you use this Chassis ,for +8mm? Carbon +8mm chassis!
You would have a long stiff piece good for penetration into the corner.
Jmuck69 is offline  
Old 09-17-2011 | 06:04 PM
  #5960  
916bdogg's Avatar
Tech Regular
 
Joined: Mar 2011
Posts: 272
From: Sacramento,CA USA
Talking

Bahaha....





916bdogg is offline  
Old 09-17-2011 | 06:41 PM
  #5961  
BSchorr's Avatar
R/C Tech Elite Member
iTrader: (101)
 
Joined: Jun 2004
Posts: 5,076
From: Superior, WI
Default

Use the composite mamm
BSchorr is offline  
Old 09-18-2011 | 01:55 PM
  #5962  
idrummerboy13's Avatar
Tech Elite
iTrader: (15)
 
Joined: Jul 2010
Posts: 2,021
From: Deer Park
Default

Why grind the u brace 2mm? i run 0 degree hubs no washers what will that do, i saw somebody posted that on a page or 2 ago...i am going to try my b4.1 limo once the chassis is finished and see if i like it over the kyosho....
idrummerboy13 is offline  
Old 09-18-2011 | 02:31 PM
  #5963  
Registered User
iTrader: (4)
 
Joined: Feb 2011
Posts: 411
From: Mesa, AZ
Default

Originally Posted by Jmuck69
Try running the lipo in the back position. With the longer chassis it will have a greater effect. Also, what anti-squat are you running?
I am running the standard 2.0 degree anti-squat. I rebuilt my car and went back to the +8 chasis and ran at a larger outdoor track last night. The car handled much better, Im not sure what was the key to my "nose diving" issue other than rebuilding the shocks again. Thanks for your feedback
Ryno B4.1 is offline  
Old 09-18-2011 | 02:38 PM
  #5964  
Registered User
iTrader: (4)
 
Joined: Feb 2011
Posts: 411
From: Mesa, AZ
Default

Originally Posted by Wild Cherry
Ryno , in my experience when ever
I encounter a racer with nose dive issues ?

I almost find every time the transmitter has not been adjusted correctly before programing the ESC .


also


See some with the brake adjustment set very high or as hard as the ESC can apply .

hope this helps U
Cherry, yes I originaly had too much drag brake which was making this issue even worse. I fixed that a few weeks back and was still having the same problem to a lesser degree. As I said in the previous post, I rebuilt the car yesterday and went back to the +8 chassis and it handled much better. Thanks for your feedback
Ryno B4.1 is offline  
Old 09-18-2011 | 04:39 PM
  #5965  
Tech Adept
iTrader: (13)
 
Joined: Sep 2011
Posts: 118
From: Oregon
Default For Sale: Kyosho RB5 Shocks

I have a set of brand new in the package never opened Kyosho RB5 shocks that came in a kit. $60 for the set.

sold

Last edited by K-Wat; 09-18-2011 at 11:39 PM.
K-Wat is offline  
Old 09-18-2011 | 04:49 PM
  #5966  
D-Rek07's Avatar
Tech Fanatic
iTrader: (1)
 
Joined: Aug 2010
Posts: 815
From: Sadly moved to Tennessee
Default

Originally Posted by K-Wat
I have a set of brand new in the package never opened Kyosho RB5 shocks that came in a kit. $60 for the set.
Front and rear?
D-Rek07 is offline  
Old 09-18-2011 | 05:40 PM
  #5967  
Tech Adept
iTrader: (13)
 
Joined: Sep 2011
Posts: 118
From: Oregon
Default For Sale: Factor Team B4.1

I am selling my FT B4.1 roller that is only a couple of months old with very little use. It has the 0.0* aluminum hubs, graphite 'C' hub tower, brand new never painted PL BullDog body, kit whels and tires, original box and manual, all the extra tuning parts such as A and B hubs and toe blocks. Also includes some spare parts, some are brand new in the package. $175 shipped. No electronics. PM me and i can email pictures.
K-Wat is offline  
Old 09-18-2011 | 05:43 PM
  #5968  
Tech Adept
iTrader: (13)
 
Joined: Sep 2011
Posts: 118
From: Oregon
Default For Sale: FT T4.1 roller

I am also selling my Factory Team T4.1 that won me a 3rd place podium position and the ROAR Region 11 Championships. $130 shipped.
K-Wat is offline  
Old 09-18-2011 | 05:45 PM
  #5969  
ovalracer1m's Avatar
Tech Master
iTrader: (29)
 
Joined: May 2006
Posts: 1,173
From: Alexandria, MN
Default

Originally Posted by K-Wat
I am selling my FT B4.1 that is only a couple of months old with very little use. It has the 0.0* aluminum hubs, graphite 'C' hub tower, brand new never painted PL BullDog body, kit whels and tires, original box and manual, all the extra tuning parts such as A and B hubs and toe blocks. Also includes some spare parts, some are brand new in the package. $175 shipped. PM me and i can email pictures.
Last time I checked this was not the for-sale section. Post it where it belongs. This is car thread, not a thread to sell your crap on
ovalracer1m is offline  
Old 09-18-2011 | 05:47 PM
  #5970  
BrentH's Avatar
Tech Master
iTrader: (14)
 
Joined: Oct 2009
Posts: 1,123
From: Atlanta
Default

Originally Posted by K-Wat
I am also selling my Factory Team T4.1 that won me a 3rd place podium position and the ROAR Region 11 Championships. $130 shipped.
3rd place really! I'll take it.... It's called a For Sale thread look it up.
BrentH is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.