RC10B4.1 FT/WC
#5956
Ryno , in my experience when ever
I encounter a racer with nose dive issues ?
I almost find every time the transmitter has not been adjusted correctly before programing the ESC .
also
See some with the brake adjustment set very high or as hard as the ESC can apply .
hope this helps U
I encounter a racer with nose dive issues ?
I almost find every time the transmitter has not been adjusted correctly before programing the ESC .
also
See some with the brake adjustment set very high or as hard as the ESC can apply .
hope this helps U
#5957
Tech Rookie
iTrader: (5)
Joined: Sep 2011
Posts: 19
The standard lenght composite chassis weights around 136grams/5oz. The 8mm chassis’s have I modified are around 144grams for the composite chassis and 134grams for the T4 chassis without the circle on the bottom. The newer chassis is a little thinner than the standard.
#5962
Why grind the u brace 2mm? i run 0 degree hubs no washers what will that do, i saw somebody posted that on a page or 2 ago...i am going to try my b4.1 limo once the chassis is finished and see if i like it over the kyosho....
#5963
Registered User
iTrader: (4)
Joined: Feb 2011
Posts: 411
From: Mesa, AZ
I am running the standard 2.0 degree anti-squat. I rebuilt my car and went back to the +8 chasis and ran at a larger outdoor track last night. The car handled much better, Im not sure what was the key to my "nose diving" issue other than rebuilding the shocks again. Thanks for your feedback
#5964
Registered User
iTrader: (4)
Joined: Feb 2011
Posts: 411
From: Mesa, AZ
Ryno , in my experience when ever
I encounter a racer with nose dive issues ?
I almost find every time the transmitter has not been adjusted correctly before programing the ESC .
also
See some with the brake adjustment set very high or as hard as the ESC can apply .
hope this helps U
I encounter a racer with nose dive issues ?
I almost find every time the transmitter has not been adjusted correctly before programing the ESC .
also
See some with the brake adjustment set very high or as hard as the ESC can apply .
hope this helps U
#5967
Tech Adept
iTrader: (13)
Joined: Sep 2011
Posts: 118
From: Oregon
I am selling my FT B4.1 roller that is only a couple of months old with very little use. It has the 0.0* aluminum hubs, graphite 'C' hub tower, brand new never painted PL BullDog body, kit whels and tires, original box and manual, all the extra tuning parts such as A and B hubs and toe blocks. Also includes some spare parts, some are brand new in the package. $175 shipped. No electronics. PM me and i can email pictures.
#5969
I am selling my FT B4.1 that is only a couple of months old with very little use. It has the 0.0* aluminum hubs, graphite 'C' hub tower, brand new never painted PL BullDog body, kit whels and tires, original box and manual, all the extra tuning parts such as A and B hubs and toe blocks. Also includes some spare parts, some are brand new in the package. $175 shipped. PM me and i can email pictures.
#5970




