5LikesSC10 4x4 Thread
05-23-2011 | 07:20 PM
#1996
To build the emulsion style, first put the rubber ring in the cap in place of the bladder(make sure it is in the correct way so it seals off the bleeder hole below the bleeder screw). Tighten the cap. Take out shock cartridge, fill shock, screw in shock cartridge with shock shaft extended then back out about a half turn and push shaft all the way in. Hold shaft all the way in and tighten the cartridge. That should do it. Hopefully I explained it well enough. Kyosho ultima scr's are done this way if you want to find and download the manual to see how they explain it.
05-23-2011 | 07:30 PM
#1997
The last I heard, the sway bar sets were supposed to be out at "the end of the month". Does anyone have a more exact date or are we still kinda in the dark on when they're going to be released?
05-23-2011 | 07:43 PM
#1998
05-23-2011 | 07:58 PM
#2002
To build the emulsion style, first put the rubber ring in the cap in place of the bladder(make sure it is in the correct way so it seals off the bleeder hole below the bleeder screw). Tighten the cap. Take out shock cartridge, fill shock, screw in shock cartridge with shock shaft extended then back out about a half turn and push shaft all the way in. Hold shaft all the way in and tighten the cartridge. That should do it. Hopefully I explained it well enough. Kyosho ultima scr's are done this way if you want to find and download the manual to see how they explain it.
05-23-2011 | 08:15 PM
#2004
does anybody know if there are any plans on a stainless steel screw kits in the near future? I gave my baby its first bath over the weekend and the screws are all rusty and nasty looking now. I forgot how much better things looks with all the silver stainless screws in place of the black/rusty ones
05-23-2011 | 08:15 PM
#2005
For what it's worth, my LHS called the distributor to check on the sway bar back orders while I was there earlier this evening. They said "we don't have a date".
05-23-2011 | 10:33 PM
#2007
Tech Adept
Joined: Dec 2010
Posts: 111
From: WCRC
Any ideas on how to build the shocks emulsion style, both bladders on the front shock blew out during A main. Im pretty sure I built them right bladder style but ive never had bladder style shocks before. Not really happy with these shocks ive never had shocks leak and blow out like this before. Thanks for any ideas and help.
http://www.teamassociated.com/multim...4_Shock_Build/
05-24-2011 | 03:02 AM
#2010
Tech Adept
Joined: Jul 2010
Posts: 106
From: Norway
Diffs
Are the diffs on this beauty the same as in the SC10? ( 9827 ) This:
http://www.amainhobbies.com/product_...r-Differential
Edit:
Just realised that the manual states this in spare parts for diff: 91008 - 4x4 Gear Diff Kit. Guess that means different diffs. Still interested if anyone knows this for sure though.
http://www.amainhobbies.com/product_...r-Differential
Edit:
Just realised that the manual states this in spare parts for diff: 91008 - 4x4 Gear Diff Kit. Guess that means different diffs. Still interested if anyone knows this for sure though.