5LikesSC10 4x4 Thread
05-09-2011 | 09:49 PM
#151
Tech Legend
Joined: Aug 2001
Posts: 22,595
From: TRCR Modified Driver
Tip :
If you need new rims the losi fit, but be aware the rim is a bit thicker and you may wish to use a brand new lock nut or lock-tite the wheel nut .
cause
a wheel may fall come off during your run if the lock nut is so , so ...
If you need new rims the losi fit, but be aware the rim is a bit thicker and you may wish to use a brand new lock nut or lock-tite the wheel nut .
cause
a wheel may fall come off during your run if the lock nut is so , so ...
05-09-2011 | 09:50 PM
#152
Australia has the truck and Canadians are still waiting.... explain THAT one...
Does anyone have an actual length that the servo wire needs to be to get to the receiver box WITHOUT extensions? I have no issue running extensions if my Savox won't reach, but would like to know if I need to go get one now, before the truck arrives, rather than get the truck finished and have to wait for my LHS to open the next day so that I can get one...
05-09-2011 | 10:01 PM
#154
Tech Adept
Joined: Mar 2011
Posts: 105
From: North Texas
Australia has the truck and Canadians are still waiting.... explain THAT one...
Does anyone have an actual length that the servo wire needs to be to get to the receiver box WITHOUT extensions? I have no issue running extensions if my Savox won't reach, but would like to know if I need to go get one now, before the truck arrives, rather than get the truck finished and have to wait for my LHS to open the next day so that I can get one...
Does anyone have an actual length that the servo wire needs to be to get to the receiver box WITHOUT extensions? I have no issue running extensions if my Savox won't reach, but would like to know if I need to go get one now, before the truck arrives, rather than get the truck finished and have to wait for my LHS to open the next day so that I can get one...
05-09-2011 | 10:18 PM
#156
Tech Initiate
Joined: Dec 2010
Posts: 42
Shipped from Tower on Friday (sat our time),
Arrived here at lunch time tuesday (monday your time).
I claim the first SC10 in AU!? Another local Aussie is also getting his today also as far as i know.
Tower & UPS pulled Through foe me
Here is the UPS Path it took to get here http://wwwapps.ups.com/tracking/trac...02200471530886
Justin! here mate!
05-09-2011 | 10:21 PM
#157
Tech Master
iTrader: (1)
Joined: Aug 2009
Posts: 1,143
From: Havasu AZ
Well, I got mine today from the big brown truck. Started sorting everything out. Then building. Pulled the diffs apart to check the fluid level as it had been mentioned of low levels of fluid. Mine was low too. Everything was smooth as could be until I got to the outer rear hinge pins. One has threads and the other is smooth as silk. (no threads cut) just wanted to share for QC purposes.
Glad I could help with you catching the low diff oil" I'd bet theres alot of
guys putting them together and never bothered to take them apart to
check the diff oil to see if it's low...
They'll be alot of twitchy SC10 4x4's running around tracks everywhere
because the diffs hardly have any diff oil in them I'd bet..
05-09-2011 | 10:44 PM
#158
Tech Initiate
Joined: Feb 2010
Posts: 23
Australia has the truck and Canadians are still waiting.... explain THAT one...
Does anyone have an actual length that the servo wire needs to be to get to the receiver box WITHOUT extensions? I have no issue running extensions if my Savox won't reach, but would like to know if I need to go get one now, before the truck arrives, rather than get the truck finished and have to wait for my LHS to open the next day so that I can get one...
Does anyone have an actual length that the servo wire needs to be to get to the receiver box WITHOUT extensions? I have no issue running extensions if my Savox won't reach, but would like to know if I need to go get one now, before the truck arrives, rather than get the truck finished and have to wait for my LHS to open the next day so that I can get one...
05-09-2011 | 10:47 PM
#159
Tech Adept
iTrader: (4)
Joined: Dec 2010
Posts: 139
My lhs should have mine in the morning, I have a mamba monster and 1410 waiting patiently for a home.
For the record to anyone thinking about the sct system, get it and don't look back, the motor is worth it alone, and the spedo will work great in a buggy or stadium truck.
For the record to anyone thinking about the sct system, get it and don't look back, the motor is worth it alone, and the spedo will work great in a buggy or stadium truck.
05-10-2011 | 12:06 AM
#162
Tech Regular
iTrader: (16)
Joined: Dec 2010
Posts: 425
From: So Cal
https://picasaweb.google.com/1113101...31478/SC104x4#
so i built some sway bars for the car, since it badly needed em. used ~2.1mm piano wire for the bars. for the links i used AE 1/10 lower shock mounts on the arms and stole the bar joints from my B44 swaybar kits. the chassis mounts for the bar were made from a sheet of ABS, i cut to the right dimensions and slotted for the bar to clamp in.
i highly recommend Chris Jarosz's setup if you run on high traction clay.
so i built some sway bars for the car, since it badly needed em. used ~2.1mm piano wire for the bars. for the links i used AE 1/10 lower shock mounts on the arms and stole the bar joints from my B44 swaybar kits. the chassis mounts for the bar were made from a sheet of ABS, i cut to the right dimensions and slotted for the bar to clamp in.
i highly recommend Chris Jarosz's setup if you run on high traction clay.
Last edited by Aoh; 05-10-2011 at 12:44 AM.
05-10-2011 | 12:24 AM
#163
in order from building and almost done! Also in the last pic those are losi ten scte wheel and fit perfect to let you guys no!
Ill be running this:
Savox 1268 servo
RX8 Esc
Neu 1509 1.5d 4500kv motor
and a 3300t receiver
Ill be running this:
Savox 1268 servo
RX8 Esc
Neu 1509 1.5d 4500kv motor
and a 3300t receiver
05-10-2011 | 12:29 AM
#165