thks bro for the adknowlegement

Petevette, you will like the 7 port very much with that pipe. what are you running it in, you can get close to the same feel on the bottom when clutched correctly, and it has a crapload of top, the stock 7 port is smooth, so maybe a little more aggressive on the clutch and you will be very happy, or another pipe, i like the 1005 on my 7 ports, plenty of bottom without killing the top end. a pipe i havn't tried yet is the 2045, i hear it is working very well on the 7 ports, and GO is making their own 2045 version.

hi all im pretty dammed impressed with go tech engines i have been using a jp 8 port fx which it is a great motor thats for sure, had a few probs with it put my go tech engine 5 port i keep in my bag as a back up and was amazed how awsome the motor was , i drop my lap times by 2 seconds the power is awsome its easy too tune and dam well relaiable as far as im concerned these are the motors that i will continue run
do the dynamite 086 053 pipes work for the buggy aswell im using the nova rossi 2035 pipe which pipes are recomended for out door medium to high bite

The 086 pipe is probably best for out door tracks. I seriously doubt that there's an outdoor track with high enough traction to handle using an 053 pipe on the 5 port. I only use the 053 indoor on an ultra high bite clay track. But man, is it great under those circumstances!

you havent been to my track...

And you've been to mine? Ask Mike Truhe next time you see him.

Hi Massive, from what I heard regarding those .28's the cylinder head broke away from the crankcase. Ended up in two seperate bits, not due to any internal damage, but just sheared through. Strange one heh ?
I'm thinking now maybe I should not have mentioned it on here. The Go Tech motors are awesome, and I don't want to appear to be rubbishing them. Just thought you guys might have heard of similar incidents. These two events could be purely coincidental.
Anyone reading this should not be put off buying a Go tech. I am very, very happy with my 5 port. As far as performance value for your dollar goes, you can't go past a Go !!

I am running it on a RC8 with a 17T bell. I run mostly on loamy tracks with the occassional blue grove. Do you think I may have to go back to the 16T? I will play around with the clutch a little to see what works best.

Hey Russell......hope things are going well!

I have a customer that is interested in using the 7 port turbo for his 1/8th scale onroad. Has anybody done this? Opinions?

Thanks,

Jay

P.S. Russell.....I cant find your number, can you PM it to me? Thanks

Petevette, here is what I'm doing at this very moment, breaking in a fresh modded 7 port turbo, i have a 2060 sprung to it and i'm going to run it that way on our small inddor track, i have AE sgoes with two 1.1 and one 1.0 with the 16 bell, this is where you would normally run 3 or 5 ports with the track being so small, low 13 second LT's try this set up and let me know what you think, I'm going to try and hit the Psycho nitro blast in GA, the straitaway is a little over 200 FT, this motor should feel right at home. they make enough bottom but are still smooth, you will be happy.

No thats cool , im just curious about the circumstances surrounding the break , it can be a material thing or it just could be landing on your head breakage.. Its all good i think by now people understand that the Go Engines are awesome and it shouldnt deter them from getting one.

Thanks Brian, can't wait to get it dirty and see what she can do. The Go Tech engines have always fascinated me, this is going to be my first time seeing what they are capable of. I really hope it is a winner because I am done with the P5X.

I hear ya, right now I'm in the idle to 1/2 throttle on the breakin, just take your time breaking it in, people get all gitty and want to rush it, take your time and it iwll pay off in the long run.

what i meant is that my track is a high enough traction track to handle the 5 port with the 053...

Hi Guys I was wondering what the latest on the new 3 or 4 port race motor is and when it going to be available . Mark