1LikesBMI Racing Discussions
09-06-2006 | 02:43 PM
#9616
Originally Posted by protc3
hey guys,
heres a pic of the prototype layshaft mount/motor mount brace that will be in with the cyclone chassis kit.this is just the prototype and will be modified for final production to make it really nice looking.i just wanted to get the function down first.
heres a pic of the prototype layshaft mount/motor mount brace that will be in with the cyclone chassis kit.this is just the prototype and will be modified for final production to make it really nice looking.i just wanted to get the function down first.
see you saturday!
I need this for Vegas 
09-07-2006 | 07:38 PM
#9622
Tech Master
iTrader: (50)
Joined: Feb 2005
Posts: 1,638
From: On a ship in the warm seas with no sail !!!
Originally Posted by protc3
got that pink c/f put aside for you bro 
By the way did you have a chance to locate a 2.25mm chassis??
feel free to leave me an e-mail.
Thanks Again,
Alex
09-08-2006 | 08:23 AM
#9624
Joined: Mar 2003
Posts: 5,682
From: Peoples Republic of Northern Virginia
Originally Posted by protc3
hey guys,
the 1/12th kits are cut and ready to go.i had to order screws that should be here by friday.i have been feeling a bit off this past week with a stomach bug so i have been in and out of the shop.i will be back on track once i get rid of this thing.sorry for the hold up.
the 1/12th kits are cut and ready to go.i had to order screws that should be here by friday.i have been feeling a bit off this past week with a stomach bug so i have been in and out of the shop.i will be back on track once i get rid of this thing.sorry for the hold up.
09-09-2006 | 09:17 AM
#9629
BMI 12th & Brushless Motor
HELP
Jason or anyone else that has tried the following,
just tried to fit the Neo Motor into motor pod with no luck. Had to remove left alloy pod plate to get it in. Carbon top plate then won't allow motor wire pick up points to be upright as the motor screw holes don't line up. If I lay the motor wire pick up points forward they are to close to the radio tray/damper tube plate which may affect suspension travel and maybe even cause a short through the carbon/motor wires if they touch.
Post some pics if you have managed to fit the Neo Motor as I maybe missing something.
Jason. did you get the email I sent you?
Jason or anyone else that has tried the following,
just tried to fit the Neo Motor into motor pod with no luck. Had to remove left alloy pod plate to get it in. Carbon top plate then won't allow motor wire pick up points to be upright as the motor screw holes don't line up. If I lay the motor wire pick up points forward they are to close to the radio tray/damper tube plate which may affect suspension travel and maybe even cause a short through the carbon/motor wires if they touch.
Post some pics if you have managed to fit the Neo Motor as I maybe missing something.
Jason. did you get the email I sent you?
09-09-2006 | 11:17 AM
#9630
we just changed the upper pod plate to accomodate the brushless motors.
when and where did you email me?if it was to [email protected] i will see it on monday.that is my shop email.
when and where did you email me?if it was to [email protected] i will see it on monday.that is my shop email.