R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road > Team and Company Discussions

Reply
 
Thread Tools Search this Thread
Old 10-06-2003, 07:53 PM   #1
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,838
Trader Rating: 13 (100%+)
Default B.M.I. Racing joins the electric circuit

Hey guys,i just want to let you guys know about the new electric chassis from B.M.I. Racing that is about to hit the market.it is carbon fiber chassis kit w/ upper brace for your tc3.kit comes with all necessary hardware for assembly.if you are familiar with B.M.I. Racing then you already know that we only put out quality products that work.i will be posting pics as soon as i finish the run.
the kit will be available in standard color carbon fiber and in blue.any other colors can be done on special order but the cost will be slightly higher.chassis kits will be $99.99 including chassis,top deck,standoffs ,motormount,ect.a race package is available FT TC3 with chassis kit for $389.99.we will have a rtr kit available by mid october.if you have seen our nitro tc3 chassis you will see that we only put out the finest most effective products.thanks for your time.
jay
protc3 is offline   Reply With Quote
Old 10-06-2003, 09:48 PM   #2
Tech Elite
 
speedxl's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jun 2003
Location: Portland Oregon.
Posts: 3,881
Default

another warpspeed wanna be. i have the d-1 and d-2 what does this car have thats different than the demons.
__________________
Pemberton / R1 / All out motorsports / Team Power Push
speedxl is offline   Reply With Quote
Old 10-06-2003, 10:29 PM   #3
Tech Fanatic
 
Join Date: Sep 2003
Location: Lake Elsinore, ca
Posts: 873
Default tc3 chassis

What is going to be different about it. Are you putting the batteries on the other side? I am really starting to nitice the tourqe steer now that I have changed everything over to carbon.
tcmerf is offline   Reply With Quote
Old 10-06-2003, 10:38 PM   #4
Tech Elite
 
speedxl's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jun 2003
Location: Portland Oregon.
Posts: 3,881
Default

some how even with a modified i have never felt the torque steer ii tend to trim the car so it wont on the tub car but on the demon car there is no torque steer!
__________________
Pemberton / R1 / All out motorsports / Team Power Push
speedxl is offline   Reply With Quote
Old 10-07-2003, 04:20 AM   #5
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,838
Trader Rating: 13 (100%+)
Default

i am not here to knock the demon cars,i am friends with victor and actually helped him develope it.it is not going to be like anyone elses chassis.please dont fire at me like im trying to do something evil.im just trying to finally put something out there that actually works.work with me and you will see the differences between my products and what erveryone else has
protc3 is offline   Reply With Quote
Old 10-07-2003, 09:51 AM   #6
Tech Elite
 
lem2's Avatar
 
Join Date: Oct 2001
Location: OC
Posts: 3,061
Trader Rating: 6 (100%+)
Default When

So when will you show us a proto-type?
I've been thru a Graphite chassis milled to the max- liked it
I'm in the process of testing my Demon-wait and see.

I'm hooked with the TC3, its like being married to it, hehehehe. Having another chassis is a welcome to TC3 fanatic like me. I must admit, I'm more of "for show" than "go", but who knows, I might get better along the way.

So don't you make us wait any longer, and christmas is just around the corner- and it maybe on the list of Us tc3 loyalists.

Peace, Goodluck and More power!
lem2 is offline   Reply With Quote
Old 10-07-2003, 01:33 PM   #7
Tech Elite
 
speedxl's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jun 2003
Location: Portland Oregon.
Posts: 3,881
Default

i am not knocking you just want to see how yours can be different. i have a d-1 and waiting for my d-2 the car works really good how can you improve on victors other rhan cosmetically!
__________________
Pemberton / R1 / All out motorsports / Team Power Push
speedxl is offline   Reply With Quote
Old 10-07-2003, 02:47 PM   #8
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,838
Trader Rating: 13 (100%+)
Default

thanks for working with me guys,the prototype should be ready within the week,i got hit with the flu which slowed me up.i will get pics for everyone within about a week.also the d1 and d2 are great chassis,mine is just different.yes,its alot of cosmetics but at the same time i am defeating all of the problems with the car.unlike the warp chassis i went with the standard by keeping the batteries on the same side.BUT i moved them to where they should be.i did alot of testing,i moved the batteries where i felt they needed to be,yes closer to the driveshaft but...i cant give away all the secrets yet,i can tell you that it is very light,very stiff and very pretty.im not looking to make a killing on it that is why the price is alot lower than everyone elses.i do all the engineering and machining myself.i own a 12,000 sq. ft. shop loaded with all the latest cnc milling ,turning,punching,welding,anything i need to do.i am an engineer and machinist of 15 years and have alot to offer you guys.i am looking foward to doing business with you guys and i will have some pics up here real soon,i will post a pic of the chassis without the brace some time today.thank you for posting on my thread.

jay
protc3 is offline   Reply With Quote
Old 10-07-2003, 02:52 PM   #9
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,838
Trader Rating: 13 (100%+)
Default

also ,tourqe steer is caused by chassis flex.also placement of the motor.shaft drive cars are notorious for tourqe steer.the way to stop it is a stiff chassis and good placement of the motor.i managed to eliminate tourqe steer in the nitro car,that was hard.this is a walk in the park.trust me guys.this thing will work
protc3 is offline   Reply With Quote
Old 10-07-2003, 03:08 PM   #10
Tech Adept
 
Cracker78's Avatar
 
Join Date: Feb 2002
Location: Green Bay, WI
Posts: 140
Send a message via AIM to Cracker78
Default

Well, I must say I am interested in seeing what you have to offer

*patiently awaits for some pics to be posted*
Cracker78 is offline   Reply With Quote
Old 10-07-2003, 04:10 PM   #11
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,838
Trader Rating: 13 (100%+)
Default

well guys,this is the only pic i have so far.it is from last weekend.the material used for the chassis was only for prototype.
it will be offered in blue and standard carbon fiber.the upper level brace has been completed but no pics yet.beside it is my nitro chassis milled from a solid 1 inch x5 inch x 13 1/4 inch block of aluminum.it is all 1 piece.it is stiffer ,lighter,and has a lower center of gravity than stock.due to rigid design,i eliminated the radio tray.did i mention lighter

Last edited by protc3; 10-07-2003 at 04:19 PM.
protc3 is offline   Reply With Quote
Old 10-07-2003, 04:11 PM   #12
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,838
Trader Rating: 13 (100%+)
Default

sorry guys that was predetor vision.ill do again
protc3 is offline   Reply With Quote
Old 10-07-2003, 04:16 PM   #13
Tech Lord
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,838
Trader Rating: 13 (100%+)
Default

again
Attached Images
File Type: jpg p8180042.jpg (63.3 KB, 3411 views)
protc3 is offline   Reply With Quote
Old 10-07-2003, 04:19 PM   #14
Tech Elite
 
seaball's Avatar
R/C Tech Charter Subscriber
 
Join Date: Sep 2001
Posts: 4,303
Trader Rating: 9 (100%+)
Send a message via Yahoo to seaball
Thumbs up

yup, more power to ya. i am not a tc3 driver...yet...but i am wondering when one of these conversion kits will include full aluminum bulkheads like the baracuda? i got to play with the yok sd car and i can see that a ton of flex is a result of the actual bulkheads, or gearcases, flexing. it's not an issue unless you use a top deck

no doubt that the tc3 is a vicious car in the right hands. from an engineering standpoint, what are the advantages to the classic double deck chassis over the tub? the top deck raises the cg, and will be subject to tweak issues over the tub. at least if the tub tweaks, you can adjust and forget it. the twin plates don't always tweak out the same direction or magnitude. I know that weight is not an issue with the tub as many racers are able to get to <50 oz w/o much work. and everyone and their brother has milled them out the get the batteries to the centerline. while i wish anyone who is creative enough to bring something new to the market much sucess, i am curious to what the reason will be for the success.

good luck the price is right.
__________________
*** The Gate II - Home of Mike Wise ***
seaball is offline   Reply With Quote
Old 10-07-2003, 04:21 PM   #15
Tech Elite
 
Brian McGreevy's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jan 2003
Location: Illinois
Posts: 4,081
Trader Rating: 10 (100%+)
Send a message via AIM to Brian McGreevy Send a message via Yahoo to Brian McGreevy
Default

Looks like it could be a nice chassis. Lets see how it ranks up to a Demon , hopefully it'll be good.
__________________
USVTA Member #211

Support Formula SAE - get kids into engineering!
http://motorsports.illinois.edu/

Last edited by Brian McGreevy; 10-07-2003 at 04:53 PM.
Brian McGreevy is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Crawler / climber discussions Frost Malaysian R/C Racers 40 02-09-2007 11:37 AM
EXTREME RC MODIFICATION - Findings and Discussions mop_iko Nitro On-Road 126 08-20-2004 03:12 PM
Discussions with UCHEATULOSE !! lmunno Florida Racing 5 04-12-2004 08:34 PM
Gran Turismo 3 A-Spec helps and discussions Cmotif Chat Lounge 72 01-17-2002 07:19 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 02:23 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net