469LikesTekno RC ET410 Thread
05-26-2019 | 12:03 PM
#901
05-26-2019 | 12:20 PM
#902
05-26-2019 | 07:32 PM
#903
Tech Adept
iTrader: (4)
Joined: Dec 2018
Posts: 133
The ET410 is certainly a ton of fun to drive RC. Seeing that nice track...you just sparked my interest in racing again. I used to race at Bumps and Jumps. Pit Stop was next on my list to try. Good turnout for the 1/10 truggy class, or they running them in with another class?
05-28-2019 | 03:41 PM
#904
Ran 7/15/5 oils on medium/low grip outdoor track last night, seemed a bit better, but overall not a huge change over kit oils surprisingly.
Will turn my ESC punch down a bit and see how we go, 4600 4 pole is a tad excessive and likely to kill bulkheads I feel
Will turn my ESC punch down a bit and see how we go, 4600 4 pole is a tad excessive and likely to kill bulkheads I feel
05-28-2019 | 04:19 PM
#905
The 4600 is nothing like the 4300, which is a beast. The 4600 is very smooth and controllable. The 4300 is for sct's, and the 4600 is too mellow for that. Let you know when I race it, but the testing so far tells me it is fine.
05-28-2019 | 11:06 PM
#906
Tech Initiate
Joined: May 2019
Posts: 20
From: So cal
I’m looking to run my ET outdoors and wanted to try SC wheels/ tires. What are the go to SC wheels for the ET? My slash offset wheels make it about an 1 1/2 narrower than the stadium truck tires. I’m trying to get it to that width or closer to it. Any suggestions?
05-29-2019 | 05:36 PM
#907
Tech Initiate
Joined: May 2019
Posts: 20
From: So cal
2nd try... so the recommended slash rear wheel makes the ET much more narrow than with stadium truck tires. I know ST wheels are a bit wider but not over 1 1/2!? Is there another SC wheel out there that will get me to that width or am I reaching here? Thanks in advance
05-29-2019 | 07:27 PM
#909
Tech Initiate
Joined: Jan 2018
Posts: 31
From: Blaine, MN
2nd try... so the recommended slash rear wheel makes the ET much more narrow than with stadium truck tires. I know ST wheels are a bit wider but not over 1 1/2!? Is there another SC wheel out there that will get me to that width or am I reaching here? Thanks in advance
05-30-2019 | 04:16 AM
#910
Last time I measured Pro-Line (Traxxas offsets) 4wd and 2wd front wheels it was 2.3mm difference. The front wheels give a RC platform extra width. When I put SC wheels (Trx. 4x4 offset) on my ST (w/Associated wheels), I gave up 4mm of width on each side.
Edit: I should have explained it better. When using ST tires mounted up on Associated stadium truck wheels, and then switch to SC tires mounted on SC wheels that are the Traxxas 4wd SC offset, you will lose about 4mm of width on each side (8mm total). Hope that helps.
Edit: I should have explained it better. When using ST tires mounted up on Associated stadium truck wheels, and then switch to SC tires mounted on SC wheels that are the Traxxas 4wd SC offset, you will lose about 4mm of width on each side (8mm total). Hope that helps.
Last edited by rustyus; 06-01-2019 at 05:00 PM.
05-30-2019 | 07:53 AM
#911
Tech Addict
Joined: Jan 2018
Posts: 511
From: Tacoma Area
2nd try... so the recommended slash rear wheel makes the ET much more narrow than with stadium truck tires. I know ST wheels are a bit wider but not over 1 1/2!? Is there another SC wheel out there that will get me to that width or am I reaching here? Thanks in advance
05-30-2019 | 05:18 PM
#913
Tech Initiate
Joined: May 2019
Posts: 20
From: So cal
05-30-2019 | 05:26 PM
#914
Tech Initiate
Joined: Jan 2018
Posts: 31
From: Blaine, MN
Yeah most people bring out the 1/8 scale stuff for outdoor season. Seems like 1/10 scale is going strong in my area though. We have a class just for mini truggy and it's a blast. They handle excellent on dirt. Just like a 1/10 4x4 buggy but more forgiving. Seems to be more popular than the 4x4 sct now.