4LikesSpeed Passion Thread
10-20-2012 | 06:52 PM
#1906
There is a blinky mode for the reventon pro just download the lastest software on to your computer and upload the stock 0 profile
here is the link http://www.speedpassion.net/reventon/home.asp?t=5
just click on the software tad and download
here is the link http://www.speedpassion.net/reventon/home.asp?t=5
just click on the software tad and download
10-21-2012 | 09:28 AM
#1909
Reventon for 1s 12th scale racing 13.5 blinky
why is there two of the same Speed Passion threads?
1. THE SPEED PASSION THREAD
2. SPEED PASSION THREAD
Q:
1. which Reventon esc supports 1s lipo(no rx booster needed)?
2. if I get the Reventon S will i need a rx booster?
thanks again Speed Passion USA
1. THE SPEED PASSION THREAD
2. SPEED PASSION THREAD
Q:
1. which Reventon esc supports 1s lipo(no rx booster needed)?
2. if I get the Reventon S will i need a rx booster?
thanks again Speed Passion USA
10-21-2012 | 11:40 AM
#1910
Second, There is no Reventon out yet that supports 1s, nor do they work with Boosters that anyone knows of, The Reventon 1s capable esc is in the works and hopes of before the end of the year I beleive.
10-21-2012 | 12:03 PM
#1911
Cant say as to why theirs 2 Speed Passion threads, just that good I guess haha.
Second, There is no Reventon out yet that supports 1s, nor do they work with Boosters that anyone knows of, The Reventon 1s capable esc is in the works and hopes of before the end of the year I beleive.
Second, There is no Reventon out yet that supports 1s, nor do they work with Boosters that anyone knows of, The Reventon 1s capable esc is in the works and hopes of before the end of the year I beleive.
10-22-2012 | 08:04 AM
#1912
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
2 things we are doing...(1) REVENTON PRO-EX will be release, but I do not know when, still testing. (2) We might release a booster pack that will work on REVENTON series ESC so customer can use that with Reventon S, Stock Club Race or Reventon R....as well as PRO.
10-22-2012 | 08:05 AM
#1913
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
10-22-2012 | 08:42 AM
#1914
Tech Apprentice
Joined: Oct 2012
Posts: 70
I'm running a ftSC10 with a prostock speed control and 17.5 ultra sportsman. I run the stock sc class at trackside in Milwaukee and do ok. Anyway I am currently running the 508 program to get blinky mode. I have been seeing a lot of other options but I'm not sure if any give blinky. I need blinky but it seems some of the newer programs are offering more/better
power and or smother operation. So what are the options?? Will I see any difference? This combo has been great and I'm wondering if it could be better.
Thanks for the help!
Mark
power and or smother operation. So what are the options?? Will I see any difference? This combo has been great and I'm wondering if it could be better.Thanks for the help!
Mark
That profile will work great as others have stated. A bigger upgrade would be to a MMM 17.5. That combination of ESC and motor will be more competitive at Trackside. We have a few drivers who race there such as Ryan Pratl. Keep an eye out for him in the pits. He is a confirmed entry for the upcoming Spektrum race.
SP Tech and other might be in attendance to help out others as well.
Firmware update or profile setting change? What is happening with the ESC? Is it powering up at all?
10-23-2012 | 06:37 AM
#1917
Tech Fanatic
iTrader: (26)
Joined: Nov 2010
Posts: 842
From: Grand Rapids, MI
Voltage cutoff
What are you guys setting the voltage cutoff for the Reventon 2 cell. Set mine @ 3.0V and it shuts down after 4 min.......running a 7.5.....motor temp and ESC 118.....Lights indicate low voltage.....I might just shut if off....thoughts?
10-23-2012 | 06:51 AM
#1918
Joined: Nov 2002
Posts: 7,758
From: Chicago, IL
I have always run my Speed Passion ESCs with voltage protection off with no issues. Generally I don't race or practice anywhere near where the pack would come close to being below 3.0V.
10-23-2012 | 07:12 AM
#1920
Tech Master
iTrader: (18)
Joined: Apr 2006
Posts: 1,116
I had this same problem with my brand new reventon pro in my b4.1. I tried 3 different motors and shutting off the voltage protection and the temp as well. None of those things helped. It would still randomly shut off and when powering back on would blink the protection code again. I sent mine back in for repair this week.