2LikesTekno RC EB48 Thread
08-12-2012 | 02:33 PM
#1337
08-12-2012 | 02:35 PM
#1339
Heres pics of it with two 2s batts in it.
upload images
photo hosting
Not the best pictures, but short of the story, sure can. Gotta get the right connectors, but I think even two bullet stand up connectors will work.
Also the straps can be put in different slots for different size batteries.
upload images
photo hosting
Not the best pictures, but short of the story, sure can. Gotta get the right connectors, but I think even two bullet stand up connectors will work.
Also the straps can be put in different slots for different size batteries.
08-12-2012 | 02:51 PM
#1340
Joined: Dec 2011
Posts: 3,808
From: Texas
Thanks for posting that. I have my build nearly completed, but I've been working 12.5 hour night shifts for a week and unable to dedicate any time to removing the electronics from my old kit. After seeing your picture it is clear that I'm going to need a new battery setup. I've been running two nanotech 6600s in my D8V4 but the EB48 doesn't have enough room to install the banana plugs.
08-12-2012 | 03:11 PM
#1341
Tech Addict
iTrader: (6)
Joined: Apr 2012
Posts: 643
Both of post pics of the plugs you use. I'll see if. I have them. I did put in two 6500 2s batts and they fit fine. There really is a lot of room.
08-12-2012 | 03:11 PM
#1342
one of the great many joys of RC ;D
08-12-2012 | 03:16 PM
#1343
Joined: Dec 2011
Posts: 3,808
From: Texas
Actually I can put bigger plugs in. That pic shows how two 2s fit into the tray then are strapped in tight. Just put two full packs through this thing. When I get home ill put in bigger plugs.
Both of post pics of the plugs you use. I'll see if. I have them. I did put in two 6500 2s batts and they fit fine. There really is a lot of room.
Both of post pics of the plugs you use. I'll see if. I have them. I did put in two 6500 2s batts and they fit fine. There really is a lot of room.
08-12-2012 | 05:18 PM
#1344
Turn the packs so the plugs are on top. Velcro them together so that the bottom pack's plugs are just clear of the top pack. Put the plugs of both packs at the same end of the tray. Use a foam spacer on the opposite end so that the battery doesn't shift forward.
Like this:
==============P
X==============P
That's how I've planned to run mine from day one. If that doesn't work out I'll be buying new packs too.
Chris
Like this:
==============P
X==============P
That's how I've planned to run mine from day one. If that doesn't work out I'll be buying new packs too.
Chris
08-12-2012 | 06:22 PM
#1345
Joined: Dec 2011
Posts: 3,808
From: Texas
Turn the packs so the plugs are on top. Velcro them together so that the bottom pack's plugs are just clear of the top pack. Put the plugs of both packs at the same end of the tray. Use a foam spacer on the opposite end so that the battery doesn't shift forward.
Like this:
==============P
X==============P
That's how I've planned to run mine from day one. If that doesn't work out I'll be buying new packs too.
Chris
Like this:
==============P
X==============P
That's how I've planned to run mine from day one. If that doesn't work out I'll be buying new packs too.
Chris
08-12-2012 | 06:47 PM
#1346
I love my EB-48 and I love my EB-48. Tekno and Danny have thought of everything. I want to personly thank Danny for taking his time with this kit. I love my EB-48. She has not seen dirt yet; but the way she is built, she is going to love dirt. If you do not have a turn buckle wrench, you are not a serous racer, get one and your wrenching will be a lot easer. If you do not have a file to shave plastic parts of to fit your likings, get a file. If you did not have any of the above, stick to 1/10 scale SC. If you want to get serous about racing 1/8 scale, get with tekno. The support is beyond any other place, and those places got coustmer support with people's to answer the phone. Danny, I love your product and I love Tekno, keep up the good work and communication; this what separates you from the other companies.
08-12-2012 | 06:52 PM
#1347
Tech Master
iTrader: (12)
Joined: Oct 2005
Posts: 1,181
I love my EB-48 and I love my EB-48. Tekno and Danny have thought of everything. I want to personly thank Danny for taking his time with this kit. I love my EB-48. She has not seen dirt yet; but the way she is built, she is going to love dirt. If you do not have a turn buckle wrench, you are not a serous racer, get one and your wrenching will be a lot easer. If you do not have a file to shave plastic parts of to fit your likings, get a file. If you did not have any of the above, stick to 1/10 scale SC. If you want to get serous about racing 1/8 scale, get with tekno. The support is beyond any other place, and those places got coustmer support with people's to answer the phone. Danny, I love your product and I love Tekno, keep up the good work and communication; this what separates you from the other companies.
Once I am all done tomorrow I will post pictures and have a quiz question for you guys 
08-13-2012 | 01:03 AM
#1349
Great job on these shocks Tekno, they are silky smooth. My roller is in the same state as yours is right now ZERTA.
Tekno,
Will there be machined pistons available soon? I sorta messed up one of mine when I was cleaning up the molding material.
Tekno,
Will there be machined pistons available soon? I sorta messed up one of mine when I was cleaning up the molding material.
08-13-2012 | 07:27 AM
#1350
Tech Adept
iTrader: (1)
Joined: Oct 2008
Posts: 154
From: Texas
Couple questions while I wait to order mine
What pitch are the wheel nuts? Fine or coarse thread? I have a couple sets of KingHeadz for my D8.
What is the spacing on the wing holes? I have the Tekno wing mount for Losi/HB D8, and have a few wings that I would like to reuse.
Would the Tekno axles for the D8 work as spares? Have an extra set of those.
What are most of yall getting for spares? Set of arms, hubs, ????
Thanks, have to order a new esc first( killed 2 this weekend) and possibly a new motor(killed a Tekin).
What pitch are the wheel nuts? Fine or coarse thread? I have a couple sets of KingHeadz for my D8.
What is the spacing on the wing holes? I have the Tekno wing mount for Losi/HB D8, and have a few wings that I would like to reuse.
Would the Tekno axles for the D8 work as spares? Have an extra set of those.
What are most of yall getting for spares? Set of arms, hubs, ????
Thanks, have to order a new esc first( killed 2 this weekend) and possibly a new motor(killed a Tekin).