5LikesSC10 4x4 Thread
04-01-2012 | 07:54 AM
Joined: Mar 2008
Posts: 5,719
From: At dirt tracks in Michigan!
04-01-2012 | 08:19 AM
Tech Addict
iTrader: (3)
Joined: Feb 2010
Posts: 714
From: Bulverde, Texas
Ok guys I have been searching around for some answers to a few questions I have for a recent purchase of a SC10 4x4. I bought it for 125.00 as a roller.
1
Are there any Front bumper mods to stop it from breaking....
2What Batteries( dimensions) do I use with the B44.1 saddle pack mod ( I would assume that I use the packs from a B44.1)
3 Will a 550 motor fit otherwise what is a good ESC / Motor setup. I have a Novak Kinetic 2s already and Tekin Pro shortcourse motor.
4 Will the Bfast diff balls work
1
Are there any Front bumper mods to stop it from breaking....2
What Batteries( dimensions) do I use with the B44.1 saddle pack mod ( I would assume that I use the packs from a B44.1)3
Will a 550 motor fit otherwise what is a good ESC / Motor setup. I have a Novak Kinetic 2s already and Tekin Pro shortcourse motor.4
Will the Bfast diff balls work
04-01-2012 | 08:24 AM
Never broken the front bumper or any part of the front end on my 4x4 (2wd is another story), and I was one of the lucky guys who pre-ordered the first round of trucks months before release.
If you have a Tekin Pro4, you don't want to go back to a 550. I have a tekin 550 and my buddy runs a Pro4...both rated at the same kV and he definately has more motor than I do.
If you have a Tekin Pro4, you don't want to go back to a 550. I have a tekin 550 and my buddy runs a Pro4...both rated at the same kV and he definately has more motor than I do.
04-01-2012 | 08:33 AM
Broke mine and replaced with a t-bone bumper. Lifetime warranty, but have not had to use it yet.
Slides a little better when you land nose down too.
http://t-bone-racing.net/Brand-A-M/A...C120-p626.html
Slides a little better when you land nose down too.
http://t-bone-racing.net/Brand-A-M/A...C120-p626.html
04-01-2012 | 08:38 AM
Tech Addict
iTrader: (3)
Joined: Feb 2010
Posts: 714
From: Bulverde, Texas
Never broken the front bumper or any part of the front end on my 4x4 (2wd is another story), and I was one of the lucky guys who pre-ordered the first round of trucks months before release.
If you have a Tekin Pro4, you don't want to go back to a 550. I have a tekin 550 and my buddy runs a Pro4...both rated at the same kV and he definately has more motor than I do.
If you have a Tekin Pro4, you don't want to go back to a 550. I have a tekin 550 and my buddy runs a Pro4...both rated at the same kV and he definately has more motor than I do.
Broke mine and replaced with a t-bone bumper. Lifetime warranty, but have not had to use it yet.
Slides a little better when you land nose down too.
http://t-bone-racing.net/Brand-A-M/A...C120-p626.html
Slides a little better when you land nose down too.
http://t-bone-racing.net/Brand-A-M/A...C120-p626.html
I have been running a SCRT 10 for a while, I came across this SC10 at a local shop used with the broken bumper, I figured I would give the SC10 a try.
