Theres really no c rating standard, so with that being said im going to be selling 1000c rated batterys soon lol im only gonna charge u guys 200 dollers a pack

theres a new hobby shop here in town now he is getteig set up now and can hook up my esc and motor. i found the place to day thanks guys for the help. its the stock from the old shop and they are no more. and he just starting out .

If I remember correctly, ck said that you can cut and shorten them. Check with Mike, but I think they just need to be equal length so you don't affect timing.

just got all the stuff to get my truck done thank you guys

Tower is showing the Factory Team kits in stock now

i see everyone with your crazy c rating. well if your run a 4.5 550 you can get a way with just 35c.(if you try much lower c you taps will taps will get to hot)40c should be a perfect fit. for the rest of you with you 90c even if it did some how give you more punch (it should not/iam not sure but if i was to guess 50c would be the max power you can get that you motor can take+many battery lie on the c rating) what the point where on dirt!!!!

let do some math the lower your volts the more amps your going to run. so let say you at the end of your run 6.5volt and you run a SC4X 4.5(550) witch is 900watts your amps would 138.46/// let use the Carbon Pro 90c 2s 5000mah this how you do the math 90x5000=450000/1000=450amps(that continuous amps not even max). so why do you get a battery 450amps wend all you need is 138.46amps. a 35c 5000 is 175amps. i had a 20c 4500 that melt the tabs witch is 90amps far to little.

plz tell me if i am wrong!!! with my numbers.

i hope the new parts are soon to come out now

ill have my truck done by the end of the mo thank you all for the help

Ok roll call, who's gonna run their truck tomorrow?

Me!!
First run with center diff and blue on rear.

ME!!! reverse aluminum idler gear and B4.3's

i was in town to day a saw some rcs in a store front. it was a new guy in town and is getteing set up. what a nice fined today

Wish I was, I'll be down for awhile til my new esc and motor come in...

thanks guys for the help got a big box of parts to make it move now.

I called them today when I saw that since I've had one on backorder since Feb 1st. They are listed as "in stock, limited quantities" however the stock that they received came in in their Reno warehouse and is only for filling backorders. The next shipment will be the same and so on until all the backorders are fulfilled. The likeliness of them actually having stock on hand to purchase will probably be highly unlikely for quite some time. I always call and get on them when I have something on backorder and it shows "in stock"