|
Hello Charles, All,
Your FS-iT4 is a first generation. Mine is a second generation. The firmware is sure for a second generation of FS-iT4. The latest version is 1.02US 07-12-2013 Do you have contacted Flysky by mail ? Do you have configured your FS-iT4 to "FS-iT4 emulator" in sub menu called "USB menu" ? Does your FS-iT4 is it discovered by the update software on windows ? Note: Until you click on the "update" button nothing happens. Do you really need to update your device ? If you want to be secure, don't update yours FS-iT4.... Regards, Renaud |
i need to up date to bind more than one model at a time
|
Originally Posted by cbfsoar15
(Post 13689788)
i need to up date to bind more than one model at a time
When I installed my chip I was all set. No FW update needed. |
Originally Posted by mattie696
(Post 13665341)
I've contacted Fly-Sky about the issue and recived an promptly email that replied that they would send an SMC chip to solder into my existing FS-iT4 Transmitter. (grey) Received the chip 3 weeks later. I took apart the Tx with excitement only to remember that ive only solder a handful of times When I got to the actual board I Disconnected the Tabs and thought better to just find someone to solder it on.
http://i1056.photobucket.com/albums/...ps58371fb4.png http://i1056.photobucket.com/albums/...ps3f6d5868.png http://i1056.photobucket.com/albums/...ps78b8c2fb.jpg The IC chip reads "D1116-TG81421" UPDATE I got the firmware update for version 1.01-US. 22-01-13 from Fly-Sky. Here is the link provided below. I have not used it yet, still waiting to get the IC chip solder on :blush: Firmware update https://drive.google.com/file/d/0B1b...ew?usp=sharing Instructions https://drive.google.com/file/d/0B1b...ew?usp=sharing |
Hi guys,
do you know if the 4ch rx that comes with the radio, can handle a 2 lipo? |
Originally Posted by BuggerRc
(Post 13701186)
Hi guys,
do you know if the 4ch rx that comes with the radio, can handle a 2 lipo? |
i have hv servos. so i can plug directly to the rx the 2s lipo? is for a 1/5 scale rc car.
|
Originally Posted by BuggerRc
(Post 13701203)
i have hv servos. so i can plug directly to the rx the 2s lipo? is for a 1/5 scale rc car.
|
The manual states 6.5v max for the receiver. But, it can take the 2s lipo???
|
No one has used the IT4 receiver with a 2 lipo?
|
I just picked up a Fly Sky iT4 radio package in shiny orange chrome colour from a local seller and included with the radio is a Fly Sky FS-GR3C receiver. I can't seem to get the transmitter to bind with this receiver. I am wondering if perhaps this receiver just isn't compatible with the iT4 transmitter. Can anyone help?
|
Originally Posted by SteveM
(Post 13705497)
I just picked up a Fly Sky iT4 radio package in shiny orange chrome colour from a local seller and included with the radio is a Fly Sky FS-GR3C receiver. I can't seem to get the transmitter to bind with this receiver. I am wondering if perhaps this receiver just isn't compatible with the iT4 transmitter. Can anyone help?
|
Originally Posted by mattie696
(Post 13705652)
Sorry to say but that Rx is not compatable with the it4.
|
Steve,
Don't own this radio, but from researching and reading thread, I think your older AFHDS receiver should work. If your transmitter is the latest ic chip hardware and firmware, there should be a option in the transmitter to switch from afhds2 -- afhds. Change setting to AFHDS and try binding. Hope this helps Al |
The iT4 Transmitter will bind to the FS-iR4 AFHDS2 Receiver (what came with my iT4 TX). Hope this helps!
|
| All times are GMT -7. It is currently 11:05 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.