Does version 1.02 fix the binding issue?

I think it depends one your hardware version. The only way to find out is to try updating the firmware.

It did not fix it for me but I'm running hardware version 1.0.

well it's official, mine won't bind with two receivers....whaaaaaaaa!
still need to do the update but right out of the box tells me it's the
first generation hardware. but we'll see when I do the update.
I hope they figure this out, it's really a deal breaker.

Bummer yo.

I'd get on their website and get the support message rolling. I'm sure they would eventually send you a replacement main board as they are to me.

Mike

anyone know what other receivers work with the it4?
need a smaller one than the 4ch that came with it.
won't fit in the waterproof box of the mini erevo, just in case anyone
was going to try it. or if you did figure it out let me know.
thanks all....

THE FS-GR3C receivers from the FS-GT3B and GT3C should work with the iT4. You will have to uncheck the AFHDS2 option on the receiver setup module. The FS-GRC3 receiver is much smaller than the FS-iR4 receiver.

I have the FlySky FS iT4 Firmware Version 1.01-US 22-01-2013.

I can not find any menu item in receiver setup menu to uncheck the AFHDS2 option.
Do I not have the most recent firmware?
If not where do I download the most recent versiom?

Thanks!

well, tried posting a msg on the website and got a pop up from site in CHINESE!
can't post my message and can't read the pop up. nice!
ended up sending an email to the contact us and got an email back saying to return
the unit to the seller. all I wanted was a link to the update.
anyone have a copy of the update they can share? along with the installation instructions?
this is really getting annoying, almost ready to dump this thing.
thanks guys!

Latest firmware for it4
 

this should fix you up nice: https://drive.google.com/file/d/0B1-...it?usp=sharing

thanks,
worked like a charm, now to see if it will bind with
more than one receiver at a time.
oh but wait, just saw that I have hardware version 1.0
as well, according to mikegozz the update won't fix
the binding issue. this is killin' me.

Fixed the AFHDS2 problem but not the binding issue.
Thanks;)!!!

Could it fix the binding issues with the older receivers or does it still only bind to one of those at a time?

"Could it fix the binding issues with the older receivers or does it still only bind to one of those at a time?"

very good question, maybe someone with some older rx's can chime in here.
I know i'd be curious, just don't have any to try it out with

That's what I'm waiting for I use the older receivers but don't have an it4 yet, maybe I should just put my money where my mouth is and help you guys out, problem is if I buy one right now it probably wont be hardware version 1.00

Preliminary results show I can bind multiple FS-GR3E receivers at a time.
I bound receiver 1 on model 1 and it worked.
I bound receiver 2 on model 2 and it worked.
I set back the TX to model 1 and it worked with receiver 1 no rebinding needed.
I set the TX to model 2 and it worked with receiver 2 no rebinding needed.

The problem is you don't get any of the telemetry(temps, voltage etc.) without AFHDS2 :(