in other words you are running blinky

yes, small track, no need for boost
with boost at a larger track like IIC, i used a fan on the esc

thanks im on a small track.

Alos, an X12 4.5 is significantly faster than a 5.5, surprisingly so :eek:

i have the X20 5.5 and fast enough for my first time running mod.

Somehow i blew my speedy turning my car on after a few months on the shelf... :(
Now i'm considering whether to get a new LRP Flow WT or is there a new one coming out soon...

Anybody got any news?

Since I use Windows 10 on my notebook the LRP softer updater V2.07 doesn't work. Any suggestion to solve this problem?

Can anyone help please. I have two Flow Comp ESC's do the same thing now. Switch them on, receiver gets power and servo works but nothing from the ESC. Just the Blue LED blinking at me. Buttons do nothing. I have updated software etc. But the simple fact is the damn thing sit the blinking at me with no working buttons.

Have you done factory reset after the software update?

push and hold the SET Button, than power on the ESC.

:nod:

That must do the trick.

Factory reset cannot be done because the buttons are not working any more. Just the Blue led blinks. Two ESC's doing exactly the same thing.

I wonder if you have tried it the way mailman81 says:

-Turn tranmitter on (safety measure).

-Connect lipo to esc.

-Press and hold SET button, then switch on the esc while still pressing down the set button. Keep holding down the set button for 2 seconds and release. Do this (resetting procedure) 3 times, just to be sure you are actually resetting it.

So FIRST press and hold SET button. Only that will work.

Without resetting the buttons never work.

To use an LRP esc without buttons is like trying to drive a car without keys, unless you have that push button type of new car, but without the button...

If you open the case you can probably access the buttons for a reset ?

If he's missing the plastic buttons, he can still reach the button on the pcb with a 1.5mm hex

Hi Guys,
It sounds like the Speedos are in brick mode.
Have you connected a motor to the speedos, powerwires and Sensor?
If not than connect a motor. In case a motor is connected try a different sensorwire.
If this isn't helping, open the case and clean all the debits out of it.
And as a last step you can call LRP for service.
Denis