|
Originally Posted by beyondthepack
(Post 14330053)
Thanks for the reply. The switch was cut off and capped when I bought it. Ran it a couple of seasons with no issues. I have played with the settings before, adjusting to track conditions. I blew it out myself then light with a air compressor to no avail. If the unit is tipped upside down the mode button falls further then the set button, (don't know if that is something) Little stumped with this one. I do have a spare should this have to go to LRP, just thought that there might be something I'm missing.
|
Originally Posted by silden
(Post 14331113)
use the 5.4 for stock, this delivers more aggressive boost settings and initial punch.
|
Nevermind
|
Originally Posted by N15M0
(Post 14331643)
If I am going to run 13.5t boosted, should I go for 4.7 or 5.4? I am getting sort of confused now.
|
The flow is very smooth when matched with LRP X12 or X20 motors
|
Originally Posted by Bar
(Post 14332903)
No matter what you do with the settings when using the 5.4 firmware in 13.5 boosted you can't make it have a linear feel through the range, if you put it on a stand and test it you will see what I mean, obviously not using full power!
|
1 Attachment(s)
Originally Posted by N15M0
(Post 14333113)
Yes that is what I am feeling now. I am now running 5.4 with the x20 13.5. So I guess I should just give 4.7 a try this weekend.
|
Originally Posted by N15M0
(Post 14333113)
Yes that is what I am feeling now. I am now running 5.4 with the x20 13.5. So I guess I should just give 4.7 a try this weekend.
|
any word on the new esc yet?
|
Had anyone tried replacing the flow capacitor?
|
Originally Posted by N15M0
(Post 14351419)
Had anyone tried replacing the flow capacitor?
|
Originally Posted by Mechintosh
(Post 14351445)
Yes, used a LRP one. Larger for Mod. Positive to Postive, Negative to Negative. No issues.
|
Originally Posted by N15M0
(Post 14352529)
Which capacitor are you using? Are you using the option which is offered by LRP?
http://www.mibosport.com/muchmore-fl...ower-capacitor http://www.mibosport.com/inshop/cata...FDPC_thumb.jpg |
1 Attachment(s)
Hi guys,
I just tried to flash my flow works team to mod firmware. I left everything alone while it was updating, but it failed part way through. I came back to this message and now it won't reconnect. Is there anything I can try? |
Originally Posted by Racing4Evo
(Post 14352538)
I personally us this one from Muchmore now. It's cheaper and easier to mount to the side of the ESC. The wires are also thicker:
http://www.mibosport.com/muchmore-fl...ower-capacitor http://www.mibosport.com/inshop/cata...FDPC_thumb.jpg |
| All times are GMT -7. It is currently 07:42 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.