R/C Tech Forums - New LRP Flow Esc

Page 101 of 123

« First

101

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - New LRP Flow Esc (https://www.rctech.net/forum/radio-electronics/645867-new-lrp-flow-esc.html)

Racing4Evo

01-23-2016 06:59 PM

Quote:

Originally Posted by cyclonetog (Post 14360196)

Hi guys,

I just tried to flash my flow works team to mod firmware. I left everything alone while it was updating, but it failed part way through. I came back to this message and now it won't reconnect. Is there anything I can try?

I had this happen and unfortunately nothing worked and I had to send it in to be reflashed.

Racing4Evo

01-23-2016 07:01 PM

Quote:

Originally Posted by N15M0 (Post 14360207)

So any capacitor will do?

Yes. The bigger the capacitor rating the better but you will be fine and hard pressed to notice a big difference so long as you are running 2s Lipo.

MeBeMikey

02-13-2016 01:51 PM

Hey Luke, Three times I tried to do the update. The first time my computer was dead, next the updater failed to open properly and then 3rd time it wouldn't connect at all. I have used it several times to update firmware and never had a problem. I am going to stick with 5.4 as it seems the Universe is telling me to stick with it. I listen to the Universe and I am not happy with its decision.

See yah tomorrow. 5.0 vs 5.4

Mike

Quote:

Originally Posted by Bar (Post 14333196)

If you pm me your email I can send you the V5 Firmware which is what all the team drivers here seem to use, wish I would of known this when I got mine, have since switched back to Hobbywing but miss the braking feel on the LRP so may give one another go with the right Firmware on

silden

02-14-2016 12:25 AM

Quote:

Originally Posted by Bar (Post 14333196)

Hi,
What is the difference between the 4.7/5.4 and the 5.0 firmware?
Thank you

cplus

02-14-2016 01:40 AM

Explained in the fact sheets when you download them.

Specific firmware for stock, mod, onroad/off etc.

rendangubi

02-14-2016 04:24 AM

hello...
what is the best start ratio for flow worksteam + x12 13.5t firmware v5.4 track about 35-40 meter long...and i'm running boosted ....tq

silden

02-14-2016 06:58 AM

Quote:

Originally Posted by cplus (Post 14389869)

Explained in the fact sheets when you download them.

Specific firmware for stock, mod, onroad/off etc.

I know that 5.4 is stock, 3.8 is off-road and 4.7 is mod.
But what is 5.0.

geeunit1014

02-14-2016 07:06 AM

5.0 is the old stock software. 5.4 is the newer stock software

Dual Fuel

02-16-2016 11:10 PM

Hi guys, is there any way to know what firmware version is in the speedy as i got it second hand, but I dont have the bridge . thanks in advance

Racing4Evo

02-18-2016 01:12 PM

Quote:

Originally Posted by Dual Fuel (Post 14394693)

Hi guys, is there any way to know what firmware version is in the speedy as i got it second hand, but I dont have the bridge . thanks in advance

No, I don't know if any way except for the bridge. You can maybe narrow it down to a few firmwares based on how many programming modes you have access to but it gets trickier after that.

Racing4Evo

02-18-2016 01:14 PM

New LRP speed control coming soon

I'm hearing there will be a replacement for the LRP Flow released in Summer around July.

swerv512

02-18-2016 02:19 PM

Quote:

Originally Posted by Racing4Evo (Post 14397427)

I'm hearing there will be a replacement for the LRP Flow released in Summer around July.

I was just about to pickup my third FWT ESC... maybe i'll wait now.

piorc

02-19-2016 09:53 AM

Hey guys, im using my LRP FLOW with Trinity D4 13.t in blinky.

Any advices on setup ?

silden

02-19-2016 10:05 AM

Quote:

Originally Posted by piorc (Post 14399158)

Hey guys, im using my LRP FLOW with Trinity D4 13.t in blinky.

Any advices on setup ?

I suggest to use the 4.7 "mod" firmware and set it to blinky-mode 5 and 6 to zero. The main difference between the 4.7 and 5.4 firmware are that the brake on the 4.7 feels stronger and the throttle on the 5.4 is a bit more aggressive. I only use the 5.4 for boosted stock and 1/12 mod classes.
I hope this helps.
Denis

Racing4Evo

02-19-2016 11:37 AM

I think you can use 5.4 just change the brake mode from the default setting which is pretty bad IMO. I like the brakes on 4.7 better but 5.4 has much better throttle feel for stock.

I usually run5.4 firmware settings: 5,2,2,6,0,0,0

All times are GMT -7. It is currently 11:18 AM.

Page 101 of 123

101

Show 40 post(s) from this thread on one page