|
Cheers
|
Originally Posted by metalnut
(Post 13407977)
The factory shipped version is 4.7, right?
|
Originally Posted by trutledge83
(Post 13407987)
LRP! We need an app for android and ios phones to update and set up our speed controls. It would definitely set the brand apart and with orion charging $ for a set up box it would be more appealing for consumers to use their already owned smartphone instead of cashing out for a set up unit. We already use our computers with the lrp software what's the difference if we could use our phones at the track? !!!!!!!!!!!
No tools to tune and adjust Just lights and buttons |
Originally Posted by trutledge83
(Post 13407987)
LRP! We need an app for android and ios phones to update and set up our speed controls. It would definitely set the brand apart and with orion charging $ for a set up box it would be more appealing for consumers to use their already owned smartphone instead of cashing out for a set up unit. We already use our computers with the lrp software what's the difference if we could use our phones at the track? !!!!!!!!!!!
|
I have like the ability to just tune it with lights and buttons but wouldn't might an advanced function with some cool UI to review all your stuff from your phone. Keep it simple but give some advanced 2014 tech it you want to go there.
|
Power Capacitor
Hi all dose anyone know what is the standard spec on the Power Capacitor is pop two last night was going to buy from my electronic store
|
Originally Posted by P.I.M.P
(Post 13409861)
Hi all dose anyone know what is the standard spec on the Power Capacitor is pop two last night was going to buy from my electronic store
i don't know what you'd buy at radio shack/anywhere that isn't an R/C shop as a replacement |
Originally Posted by cplus
(Post 13400885)
No, it means neutral according to the manual.
Is your servo responding? The ESC is getting power obviously if the light is on, but is it passing it onto the servo? If not, are you sure the ESC is connected to the RX with correct polarity? Have you tried to calibrate or are you not even able to get that far? Ie: nothing happens when you hold the set button for 3secs? What happens when you use the trigger on your TX - does it stay as blue light to does it drop out/change colour? - Servo works - Motor works - receiver bound and works the only problem is the speedo itself. I promise. |
Originally Posted by P.I.M.P
(Post 13409861)
Hi all dose anyone know what is the standard spec on the Power Capacitor is pop two last night was going to buy from my electronic store
There is nothing fancy or exotic about the caps & cap banks that come stock on escs. |
Originally Posted by hanulec
(Post 13409999)
how did you pop not one, but two?
i don't know what you'd buy at radio shack/anywhere that isn't an R/C shop as a replacement |
Any news on the 5.1 update yet?
|
Newer software
Hello
Had a look at the software in the website, is there any thing more up to date? Volker can't be running software from 2012? |
Must be looking at wrong website ! Latest software 4.7 from 17-04-2014. Used at ETS Luxemburg!
|
I'm running touring car 1/10 - Lipo 2s.
The esc LRP Flow with mode cut-off voltage is 6.4 volt Can i adjust mode cut-off voltage is 7.6 volt? |
Not with any of the current firmware you can't.
|
| All times are GMT -7. It is currently 11:54 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.