So is there anything I can do to help that out? Maybe the power cap on the rx? Anything? I'm really enjoying the brushless.

Blake

Cool, Thanks. Anybody seen the new one for the 3pk yet? Supposed to be faster than the hrs. Dont know if i will go with that or just wait for Futaba's own set up. No wire at all sound kind of cool and suspect at the same time.

Blake, try the SPM1600 cap, see if that works. PM me if you try that and it doesn't fix the problem.

Merf, the new 3pk module is HRS compatible. From talking to several people the Futaba version will not be a US release, just overseas.

I also read that the wire could be cut to 4.6 inches. Is that from the outside of the caes or do i need to open it up?

You can cut the antenna lead, but there's no real need to. I want to say to like 3.6 inches, but double check the manual first.

Thanks Gary, I had the shop order me one...it should be waiting on me now. I will also be borrowing a friends 3pk to try out with it to see if I can tell if it's the transmitter or reciever having the problem.

Blake

What radio are you using now? I've personally used 2 different radios, a Helios and a Z-1 and haven't had any issues with either.

the problem of mine only happens at large track. Not sure what really causes it because other Spektrum users with TC equipped with brushed motors also have problem.

To solve the receiver shutting down is much easier I guess, I solved mine by avoiding old batteries and running 5 cell instead of 4 cell for my 1/12 pan car.

KO EX1 Mars R

Hmm, odd. I know when I ran with a Tekin Brushless in my Mini-LST I needed to use the cap because the BEC output out the Tekin was too low. The Cap took perfect care of it and it runs awesome now. I know a lot of 1/12th scale guys ran Spektrum in Cleveland, Vegas, and Snowbirds without an issue.

Is there any info on the web about this? Release date or anything? :D

Thanks, I mean the Futaba PK-FSM 2.4Ghz module and receiver. Have found a little info but not a lot. Anyone have any other info? :)

I got nothin, lol

There is a little information here http://www.rc-car-net.at/rcn/thread....=Futaba+2+4GHz :D