Community
Wiki Posts
Search

Spektrum

Thread Tools
 
Search this Thread
 
Old 05-27-2005 | 03:02 PM
  #931  
Tech Master
 
Joined: Jan 2003
Posts: 1,296
From: NSW Australia
Default

8 weeks?
Pitty you can't just upgrade the firmware/software using you computer via a $20 USB device like the castle creation bushless speedies. Would of saved a lot of headaches.
au_Nightmare is offline  
Old 05-27-2005 | 04:14 PM
  #932  
JayBee's Avatar
Tech Champion
iTrader: (31)
 
Joined: Mar 2004
Posts: 6,819
From: 12TH-MAN COUNTRY
Red face

I NEED 3 RECIEVERS... WHERE CAN I FIND THEM?!?!? -JB
JayBee is offline  
Old 05-27-2005 | 04:26 PM
  #933  
HarshGuy's Avatar
Tech Elite
iTrader: (6)
 
Joined: Aug 2001
Posts: 3,379
From: Roseville, CA
Default

Originally Posted by JayBee
I NEED 3 RECIEVERS... WHERE CAN I FIND THEM?!?!? -JB
Speedworld raceway 916-771-5318
HarshGuy is offline  
Old 05-27-2005 | 05:22 PM
  #934  
JayBee's Avatar
Tech Champion
iTrader: (31)
 
Joined: Mar 2004
Posts: 6,819
From: 12TH-MAN COUNTRY
Talking

THANX... -JB
JayBee is offline  
Old 05-27-2005 | 07:39 PM
  #935  
Tech Champion
iTrader: (16)
 
Joined: Jan 2004
Posts: 7,379
Default

Spektrum (via Losi) replaced my original receiver in about 5-10 minutes on Wednesday while at SoCal Raceway testing. The new one with modified boards is perfect. I have nothing but praise for these folks.

RC Tech in Daly City, CA (650/992-7600) has just received two NEW Spektrum receivers for me; so, I assume that a supply just became available.
Still Bill is offline  
Old 05-27-2005 | 07:42 PM
  #936  
JayBee's Avatar
Tech Champion
iTrader: (31)
 
Joined: Mar 2004
Posts: 6,819
From: 12TH-MAN COUNTRY
Thumbs up

rIgHt On
JayBee is offline  
Old 05-30-2005 | 09:52 AM
  #937  
Tech Regular
iTrader: (1)
 
Joined: Jun 2003
Posts: 489
Default

Is there a release date for the M11 spektrum???
Hugo is offline  
Old 05-31-2005 | 05:39 PM
  #938  
Registered User
iTrader: (2)
 
Joined: Aug 2001
Posts: 106
Exclamation

ok i have tryed to get my ko propo 2344 pds servo to work with the spectrum and no go so installed a analog jr servo and the system binds and works fine. the problem im having is the servo will work after i bind the rx with the airtronincs servo and plug the ko in and the power is lost from time to time with that servo. any idea's
thanks
teamatlas is offline  
Old 05-31-2005 | 05:44 PM
  #939  
theisgroup's Avatar
Tech Elite
iTrader: (10)
 
Joined: Apr 2002
Posts: 3,198
Default

Originally Posted by teamatlas
ok i have tryed to get my ko propo 2344 pds servo to work with the spectrum and no go so installed a analog jr servo and the system binds and works fine. the problem im having is the servo will work after i bind the rx with the airtronincs servo and plug the ko in and the power is lost from time to time with that servo. any idea's
thanks

needs more power!!!

try a cap
theisgroup is offline  
Old 05-31-2005 | 08:14 PM
  #940  
Tech Champion
iTrader: (16)
 
Joined: Jan 2004
Posts: 7,379
Default

Originally Posted by teamatlas
ok i have tryed to get my ko propo 2344 pds servo to work with the spectrum and no go so installed a analog jr servo and the system binds and works fine. the problem im having is the servo will work after i bind the rx with the airtronincs servo and plug the ko in and the power is lost from time to time with that servo. any idea's
thanks
Had the same problem. Installed caps on QC2 ESC and Spectrum receiver with no good results. Gave up on the KO 2343 servo and went with Airtronics. No problems encountered with the Airtronics.

Bill
Still Bill is offline  
Old 05-31-2005 | 08:59 PM
  #941  
Tech Master
 
Joined: Jan 2003
Posts: 1,296
From: NSW Australia
Default

Bypass the ESC and ko propo 2344 pds should work fine. Just dont forget the diodes to drop the voltage 8)
au_Nightmare is offline  
Old 05-31-2005 | 09:10 PM
  #942  
HarshGuy's Avatar
Tech Elite
iTrader: (6)
 
Joined: Aug 2001
Posts: 3,379
From: Roseville, CA
Default

Originally Posted by JRX-S Bill
Had the same problem. Installed caps on QC2 ESC and Spectrum receiver with no good results. Gave up on the KO 2343 servo and went with Airtronics. No problems encountered with the Airtronics.

Bill
Bummer ..so you never got the 2343 to work ....mine works fine ...but with a KO VFS1 speedo.
HarshGuy is offline  
Old 05-31-2005 | 09:14 PM
  #943  
Tech Champion
iTrader: (16)
 
Joined: Jan 2004
Posts: 7,379
Default

Originally Posted by HarshGuy
Bummer ..so you never got the 2343 to work ....mine works fine ...but with a KO VFS1 speedo.
Yep! It seems to be the combo of the Spektrum, QC2 and the KO digital servo. And I believe you that it works fine with the KO speedo, but I have 4 QC2s.
Still Bill is offline  
Old 05-31-2005 | 09:15 PM
  #944  
Bob Nilsen's Avatar
Tech Regular
iTrader: (1)
 
Joined: Jan 2004
Posts: 483
From: Dallas, TX
Default

Just so that people aren't throwing out their 2343s... mine is working fine with my QC2 and spektrum (latest software) and a 4700uf cap.
Bob Nilsen is offline  
Old 05-31-2005 | 09:36 PM
  #945  
Tech Champion
iTrader: (16)
 
Joined: Jan 2004
Posts: 7,379
Default

Originally Posted by Bob Nilsen
Just so that people aren't throwing out their 2343s... mine is working fine with my QC2 and spektrum (latest software) and a 4700uf cap.
Bob is right. I did get the two boards (upper and lower) in my Spektrum replaced last week AFTER I had already switched back to the Airtronics servo. Don't know it the updated Spektrum would have cured it; but, I have no need to find out either.

Didn't have to throw it out...The very friendly hobby shop I got it from took it back with a full refund.

Otherwise, I like KO products...I have a Helios radio and love its ergonomics with the angled steering wheel for my Spectrum.

Bill
Still Bill is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.