![]() |
Thanks for the quick response.
|
Originally Posted by RCGaryK
The conformal coating doesn't have anything to do with the ESD issue. The conformal coating is applied to make the receivers fuel proof and water resistant. The conformal coating cannot be applied to the SR3000 receivers. If you sent your receivers in before the middle to the end of April, I would send them in just to make sure you have the latest firmware. Same thing with the modules.
thanks Ross |
Originally Posted by ::TEAM SRGS::
So if l have the SR3000 receiver do l send that back and where to ??
thanks Ross Horizon Service Center ATTN: Spektrum Service 4105 Fieldstone Road Champaign, IL 61822 Include your complete name and address information inside the carton and clearly write it on the outer label/return address area. Include a brief summary of the problem. Date your correspondence and be sure that your name and address appear on this enclosure. |
Is the antenna on the DX2/DX3 replacable in the event of breakage? Can't find a part so I assume it requires it to be sent in if it is.
|
hi everyone. wanted to know any of you have any problems with using ko digital servos with spektrum. i run the pro series on carpet in my ko radio without any problems. i want to get the new ko digital servo and was told i might have problems. just want to know before i buy one. thanx.
|
Originally Posted by xtrememadness
hi everyone. wanted to know any of you have any problems with using ko digital servos with spektrum. i run the pro series on carpet in my ko radio without any problems. i want to get the new ko digital servo and was told i might have problems. just want to know before i buy one. thanx.
|
i run an lrp quantum 2 and an airtronics 94357 analog. i dont have the digital yet. dont want the ko if its gonna cause problems. maybe a jr 8800 or the new 9000 servo might be better.
|
also the ko servo i was looking at is the new 2367 ics.
|
I have not had any issues with my KO digital servo with spektrum. I have run it on carpet as well, but to be fair it was rubber on carpet, not foam. I don't know if this makes a difference or not. I also use a GTX esc for I am not an LRP fan and have read where most issues was with the Q2 and spektrum. That may all be resolved now, not sure.
|
Originally Posted by kuzo
Is the antenna on the DX2/DX3 replacable in the event of breakage? Can't find a part so I assume it requires it to be sent in if it is.
|
Originally Posted by xtrememadness
i run an lrp quantum 2 and an airtronics 94357 analog. i dont have the digital yet. dont want the ko if its gonna cause problems. maybe a jr 8800 or the new 9000 servo might be better.
|
I was just wondering where a I could find an antenna for a spektrm tx for a hitec. The hobby shop told me to send it in, but I took mine a part. I looked but have not been able to find a place that sells them.
|
The module antenna's are not sold seperately. The only way to get an antenna replaced is to send it in for service.
|
thanx rcgaryk. so its an lrp issue and not spectrum? i will get the capacitors just in case. but do you think i can still get the ko servo or stick with the jr servo?
|
Maybe I can get a answer to my question's here ok if I have the spektrum for the 3pk hrs can I use the micro racing receiver and still have hrs.
|
| All times are GMT -7. It is currently 06:52 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.