Community
Wiki Posts
Search
Like Tree2Likes

Hobbywing Xerun V3

Thread Tools
 
Search this Thread
 
Old 04-21-2014, 08:08 PM
  #481  
Tech Rookie
 
Join Date: Jan 2014
Location: Conroe, TX
Posts: 14
Unhappy Throttle wiring sequence.

Would someone be kind to let me know what the wiring sequence is for the throttle harness on the Xerun V3.1 120A so I can wire up my ESC. Manual doesn't give you the wiring sequence to channel 2 only the PRG|FAN to the right of it. Below is a pic, is the signal wire on the far left or far right of the black wire?
Attached Thumbnails Hobbywing Xerun V3-photo.jpg  

Last edited by Overpowered; 04-21-2014 at 08:25 PM.
Overpowered is offline  
Old 04-21-2014, 08:45 PM
  #482  
Tech Rookie
 
Join Date: Jan 2014
Location: Conroe, TX
Posts: 14
Default

Disregard, I just did a continuity check between the throttle harness and the fan, black wire is on the far left coming straight out of the ESC, same as PRG|FAN diagram.
Overpowered is offline  
Old 04-24-2014, 11:43 AM
  #483  
Tech Adept
 
millbank's Avatar
 
Join Date: May 2010
Location: uk
Posts: 171
Default

Please help. Esc v3 turns on as soon as plugged in and when you push the switch to turn off the light goes out but the fan stays running. Tried re flashing the software but still doing it
millbank is offline  
Old 04-24-2014, 08:46 PM
  #484  
Tech Fanatic
iTrader: (27)
 
Join Date: Jan 2012
Location: Carrollton, TX
Posts: 908
Trader Rating: 27 (100%+)
Default

Have you tried resetting your end points for throttle after you change firmwares?
hyujmn is offline  
Old 04-25-2014, 08:08 AM
  #485  
Tech Adept
 
millbank's Avatar
 
Join Date: May 2010
Location: uk
Posts: 171
Default

Yes and this would stop it turning on automaticly when connected to a lipo how? Lol
I know a fair bit about these speedo's but i think this time its fubared
millbank is offline  
Old 04-25-2014, 09:10 AM
  #486  
Tech Adept
 
Join Date: Sep 2011
Posts: 211
Default

Originally Posted by millbank
Please help. Esc v3 turns on as soon as plugged in and when you push the switch to turn off the light goes out but the fan stays running. Tried re flashing the software but still doing it
Look like the same. Mine can not turn off, its going on again if i press the power button. I have doubled the FET but nothing change.
Accidentally i lowered my gear and it's going normal. so I think there is heat related problem on my v3.
b.wihardja is offline  
Old 04-29-2014, 04:27 PM
  #487  
Tech Elite
 
COBRARACING's Avatar
 
Join Date: Nov 2007
Posts: 3,338
Default

New V3.1Zero Spec coming soon .This esc will be the replacement of the juststock but will feature more settings in the software.I think it will be the best Zero timing esc on the market.

sorry guys i cannot say to much but i can say it will be worth the wait
COBRARACING is offline  
Old 04-29-2014, 06:03 PM
  #488  
Tech Apprentice
 
bluef250's Avatar
 
Join Date: Jul 2007
Location: Wilmington, Il
Posts: 60
Default

price??
bluef250 is offline  
Old 05-01-2014, 06:55 PM
  #489  
Tech Fanatic
iTrader: (10)
 
Aja Archibald's Avatar
 
Join Date: Mar 2010
Posts: 750
Trader Rating: 10 (100%+)
Default

Anybody knows when the v10 motors will make the roar motor list?
Aja Archibald is offline  
Old 05-01-2014, 08:49 PM
  #490  
Tech Champion
iTrader: (4)
 
TryHard's Avatar
 
Join Date: Jun 2004
Location: Adelaide, Australia
Posts: 5,387
Trader Rating: 4 (100%+)
Default

Originally Posted by Aja Archibald
Anybody knows when the v10 motors will make the roar motor list?
They already are...

21.5 - http://roarracing.org/4rmb/showthrea...ck-30401020049

17.5 - http://roarracing.org/4rmb/showthrea...ck-30401020048

13.5 - http://roarracing.org/4rmb/showthrea...ck-30401020047

10.5 - http://roarracing.org/4rmb/showthrea...ck-30401020046

Mods - http://roarracing.org/4rmb/showthrea...Wing-Xerun-V10

Ed
TryHard is offline  
Old 05-01-2014, 09:23 PM
  #491  
Tech Regular
iTrader: (3)
 
Join Date: Jun 2013
Posts: 263
Trader Rating: 3 (100%+)
Default

until the roar list gets updated, it is not allowed. so while they keep saying the that it has passed inspection, it is not yet on roar's list.
see for yourself.:http://www.roarracing.com/approvals/...lessmotors.php

showing the race organizer's the link from a forum thread wont cut it.
Andrew S is offline  
Old 05-01-2014, 09:35 PM
  #492  
Tech Elite
iTrader: (49)
 
andrewdoherty's Avatar
 
Join Date: Jan 2005
Location: ★Wylie, TX★
Posts: 3,815
Trader Rating: 49 (100%+)
Default

According to ROAR, that is the list.

Welcome to the new Motor Approval section of the forum. This is intended to replace the motor list that currently resides on the ROAR website. This new section adds to the existing list, a number of new motors are are approved based on their arrival date, as confirmed by shipper tracking data. Over time, the list on ROARRacing.com will be transferred to the forum list, which will eventually be the sole source of motor approval information.

In the forum you'll find new motors that have been approved over the last month, with more detail than ever before, making the process more open and useful. You'll find the date of approval, tracking data, inspection status, Availability Check status, and Executive Committee Approval status. You will also find detailed photos of the motor's components, which will be used by the tech staff at ROAR National events for component verification, and are visible by the public for their own reference. The whole process is designed to be more open and informative, giving ROAR officials, Affiliated track owners, and ROAR members more data and a more open process of approval of the motors our members use in ROAR sanctioned racing endeavors. It's our hope that this information will speed the tech process and give affiliated tracks and organizations the resources to more easily determine compliance, to keep the playing field (especially in the Spec classes) as level as possible.

Please let ROAR know if you have any suggestions to make this and other future product approval sections of the site more useful for their intended purposes. We hope you enjoy these new sections and find them useful in preparing for any one of the many prestigious ROAR National Championships and regional events.

The ROAR Staff
andrewdoherty is offline  
Old 05-02-2014, 03:52 AM
  #493  
Tech Master
iTrader: (1)
 
Join Date: Aug 2008
Location: Medina, Ohio
Posts: 1,839
Trader Rating: 1 (100%+)
Default

It appears to be a little confusing right now at ROAR. There is the list and some new approvals go on there (example the new TSR 17.5). Others only appear at the "Forum" section for new approvals including batteries and esc's. You have to check both.
old_dude is offline  
Old 05-02-2014, 07:25 PM
  #494  
Tech Fanatic
iTrader: (10)
 
Aja Archibald's Avatar
 
Join Date: Mar 2010
Posts: 750
Trader Rating: 10 (100%+)
Default

About to do some testing this weekend. I really like this motor indoor ran strong all day. Thanks guys. I'll let you guys know how it goes.
Aja Archibald is offline  
Old 05-12-2014, 03:35 PM
  #495  
Tech Adept
 
Join Date: Dec 2010
Location: mt dora fl
Posts: 143
Default

anyone else have update problems lost program box says please update software I the latest update
to slow for you is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.