|
Originally Posted by Nego
(Post 12361101)
im running the stock program on the esc,i am going to go down on my spur to 78 i was running 81(desc210).i used 2 shims one top and one bottom.
|
Is the wi if module for the reventon designed to leave in the vehicle or is it to use the software to get more detailed adjustments? Or both? Picked one up and was curious as to how most use it.
|
Originally Posted by jackcarter3
(Post 12372258)
Is the wi if module for the reventon designed to leave in the vehicle or is it to use the software to get more detailed adjustments? Or both? Picked one up and was curious as to how most use it.
|
Originally Posted by 1mrdad
(Post 12372274)
Both. I have mine mounted in the car, and I make adjustments from the driver's stand with my cell phone. No more PC's or connecting boxes! :nod:
|
1 Attachment(s)
Originally Posted by jackcarter3
(Post 12372357)
Thanks. 1 more question. If you are not gonna leave it in the car, do you have to involve the receiver or can you just hook up the esc?
|
Originally Posted by 1mrdad
(Post 12372696)
You can connect the module directly to the esc without connecting it to the receiver and make changes. (I just tried it). Here is a pic of it mounted it mounted in my car.
|
1 Attachment(s)
Had a great weekend racing my Reventon pro's and speed passion motors worked flawless.
|
Originally Posted by See
(Post 12396324)
Had a great weekend racing my Reventon pro's and speed passion motors worked flawless.
|
Originally Posted by kwiksi
(Post 12396831)
Nice. Now peel that Tekin sticker off your pit board.:lol:
|
Originally Posted by kwiksi
(Post 12396831)
Nice. Now peel that Tekin sticker off your pit board.:lol:
|
Originally Posted by 1mrdad
(Post 12372696)
You can connect the module directly to the esc without connecting it to the receiver and make changes. (I just tried it). Here is a pic of it mounted it mounted in my car.
|
Originally Posted by dolfns1
(Post 12398895)
Was wondering what is that braided wire & where to buy love the look. Thanks
|
Originally Posted by See
(Post 12396324)
Had a great weekend racing my Reventon pro's and speed passion motors worked flawless.
|
Originally Posted by Solara
(Post 12399620)
Mike...looking good and I am sure will send some big SP sticker over for you to replace....
|
Set up
I have the Reventon Pro in my B4.2 with a Tekin 17.5. I got the PC program downloaded, and the LCD upgraded to 2.7. I am going to hook up the esc to the card and PC tonight. What do I want to download to the ESC to get "blinky?" Stock0 or Stock1.
Also, how do I switch between setups (ie mod1 to Stock0 or back)? I cannot find anything that explains how to do that, only how to work through the flow chart to change specific settings (ie brake %). Going to hit the track Saturday for the first time with this, super new to electric, and super excited!!! Thanks. |
| All times are GMT -7. It is currently 12:29 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.