|
since the blaze 550 is out as of yet.
does sp have any other 550 can motors for 4wd sct |
Originally Posted by bobsavenger
(Post 11550722)
Lipo cutoff was set at 2.6v and I did try the DRRS at 6 and 9. I did not turn off the lipo or the thermal.
I do know when I used the same sensor wire and changed from the Speed Passion ESC to my old Novak Havoc that I did not have this problem. Bad thing is the Novak doesn't have the punch that this one does. The motor is an Orion 17.5t VST. |
Hey.
Is the gt2.0 case (housing) posible to order as replacment part. Mine is broken .:( I bougt 2 new reventon pro speedos. But my gt2.0 works still great and i would like To make it clean an sharp again:) Anyone a order number? Maybe solara? |
Revention Pro
Does the revention pro use the external capacitors like the GT 2.0 pro?
|
Originally Posted by marcel p
(Post 11551674)
Hey.
Is the gt2.0 case (housing) posible to order as replacment part. Mine is broken .:( I bougt 2 new reventon pro speedos. But my gt2.0 works still great and i would like To make it clean an sharp again:) Anyone a order number? Maybe solara? |
Originally Posted by knowitall156
(Post 11551726)
Does the revention pro use the external capacitors like the GT 2.0 pro?
|
Originally Posted by subaru_tech
(Post 11551416)
since the blaze 550 is out as of yet.
does sp have any other 550 can motors for 4wd sct |
Originally Posted by Solara
(Post 11551756)
No...Reventon PRO use a single cylinder type.
|
Originally Posted by knowitall156
(Post 11551770)
Does it use the same programming box? I'm guessing no?
But....Reventon PRO came with one free, so no need to buy one, cause it came with one (LCD one) from the ESC. |
Originally Posted by Solara
(Post 11551754)
Give our office a call and talk to Albert
|
3 Attachment(s)
Originally Posted by OferS
(Post 11546970)
They did indeed warranty the capacitor. Sent me a new pair within days!! ESC was not damaged. Look for the black line on the side. It should be closer to the black wire than the red.
maybe you can tell from the pic. It would make perfect sense why it burned where it did if the poles were reversed. It didnt seem to fry the inside of the case since I dont see any smoke or discoloration through the clear bottom case. It also melted the solder joints right off the battery +/- terminals. Here are some pics |
will any 550 motor work with the reventon pro.
and can you add timing with them,without damage. |
Capacitor looks polarity correct
Originally Posted by Oldschoolrcer
(Post 11552163)
The stripe is right about in the center of the red and black wire.
maybe you can tell from the pic. It would make perfect sense why it burned where it did if the poles were reversed. It didnt seem to fry the inside of the case since I dont see any smoke or discoloration through the clear bottom case. It also melted the solder joints right off the battery +/- terminals. Here are some pics |
Originally Posted by marcel p
(Post 11551997)
Sorry. Forgot to mention im from europe. Normaly deal with tonisport. :)
|
Originally Posted by Oldschoolrcer
(Post 11552163)
The stripe is right about in the center of the red and black wire.
maybe you can tell from the pic. It would make perfect sense why it burned where it did if the poles were reversed. It didnt seem to fry the inside of the case since I dont see any smoke or discoloration through the clear bottom case. It also melted the solder joints right off the battery +/- terminals. Here are some pics |
| All times are GMT -7. It is currently 04:25 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.