|
Dave setup are on the SP site.....looking forward to post your 13.5 setup.
|
Originally Posted by Solara
(Post 9190648)
All of our GT series ESC, the red/green blinking LED are located at the BOTTOM of the ESC circuit board. We have these ESC came out way beyond the no timing rule came out so we cannot relocate the whole design because of 1 rule (techically, it is not even a rule, it is a ROAR recommendation).
The GT series ESC should have a smoked color (1/2 clear) bottom case so the blinking red LED should be able to be seen from the bottom, or the side... If you do have a solid black bottom case...your GT must be more then 2 years old.......I do have extra smoked color bottom case that I can send to you so you can replace the solid one... One more thing...once you have updated to 508 no timing software, you must turn off the ESC, and recalibrate the radio in order to see the red blinking light.... |
I thought I should let everyone know that at my track a guy let me use his hobbywing lcd programmer to channge my gt2.1 pro stock to blinky mode and it worked. So I guess I am really running hobbywing?
|
I am getting ready to order my first speed passion esc and I was curious what program card i Need? I know the GT2.1 prostock works with either card but do I NEED to spend the extra $20 to get the better card? thanks
|
Originally Posted by jnelson214
(Post 9213860)
I am getting ready to order my first speed passion esc and I was curious what program card i Need? I know the GT2.1 prostock works with either card but do I NEED to spend the extra $20 to get the better card? thanks
|
Originally Posted by kwiksi
(Post 9213909)
All the GT2.0/2.1 series speedos come with the std. LED card. If you can spend the extra... get the LCD card. This will help you interface with a laptop/PC and you will be able to D/L the latest software from Speed Passion. Then be able to flash your speedo.
|
sorry to ask so many questions... are the cirtix motors 3000kv or 4000kv ok for a 4x4 buggy 1/10 I was looking at the combo sets and it comes with the silver arrow v2 or the GT2.0 LPF.. are these worth looking at or should I stick with looking at the GT2.1 prostock ? thanks again..
|
Originally Posted by jnelson214
(Post 9220022)
sorry to ask so many questions... are the cirtix motors 3000kv or 4000kv ok for a 4x4 buggy 1/10 I was looking at the combo sets and it comes with the silver arrow v2 or the GT2.0 LPF.. are these worth looking at or should I stick with looking at the GT2.1 prostock ? thanks again..
FWIW, I am running the GT 2.0 Pro in a DESC 410R and love it so far. Handles the power of my 4.5 550 motor easily, even in heat above 90deg. Just started selling off all of my old escs and will be converting everything to Speed Passion. Super smooth, great power, and excellent feel for both throttle and brakes. 2 thumbs up! |
batteries in stock
Hey Solara,
any news on an ETA on more Speed Power 4500mah 30C 7.4V Racing Lipo batteries being in stock?? |
Jonny5, great to hear you like the stuff. It is ok to use the stock software with mod motors if you turn the boost and timing way down. It is not "recommended" so that people dont fry their motors. I run the new 323 stock software with a 7.5 in mod buggy/truck/sct but have the settings real low. They work great.
The pro isnt required for a 4wd buggy but it isnt a bad idea to use one especially if running a lower turn motor closer to the limit of the speedo. with a 7.5 or 8.5 geared properly and cooled with a fan it should be fine. As always, check temps in new conditions. |
Originally Posted by jnelson214
(Post 9220022)
sorry to ask so many questions... are the cirtix motors 3000kv or 4000kv ok for a 4x4 buggy 1/10 I was looking at the combo sets and it comes with the silver arrow v2 or the GT2.0 LPF.. are these worth looking at or should I stick with looking at the GT2.1 prostock ? thanks again..
I will have that corrected on the web.....Silver Arrow 2 ESC is better used on 3S and 4S lipo powered racing. |
Originally Posted by Jonny5
(Post 9220153)
Someone correct me if I'm wrong, but for 4wd mod buggy I believe you want the GT 2.0 Pro, and then download the latest version of mod software. The timing profiles for stock are really aggressive and aren't suited to motors under 10.5.
FWIW, I am running the GT 2.0 Pro in a DESC 410R and love it so far. Handles the power of my 4.5 550 motor easily, even in heat above 90deg. Just started selling off all of my old escs and will be converting everything to Speed Passion. Super smooth, great power, and excellent feel for both throttle and brakes. 2 thumbs up! |
Originally Posted by ghoppa
(Post 9220388)
Hey Solara,
any news on an ETA on more Speed Power 4500mah 30C 7.4V Racing Lipo batteries being in stock?? And reason why you are interested on this low mah and low c rating lipo..? May be I can find out they can get more of those instock... |
Originally Posted by mvieira342
(Post 9213671)
I thought I should let everyone know that at my track a guy let me use his hobbywing lcd programmer to channge my gt2.1 pro stock to blinky mode and it worked. So I guess I am really running hobbywing?
|
just piccked up a speed passion gran turismo 2.0 LPF. hooked it up with a tekin 13.5t motor sensored. and I have NO brakes. radio settings have been rechecked and esc recalibrated over and over again and can't figure out what's up. It has very very faint brakes even with esc brake settings at 100%%%
anyone have any ideas. help please hope i didnt waste my money on this esc |
| All times are GMT -7. It is currently 11:47 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.