R/C Tech Forums - Speed Passion Thread

Hi,

I have this scenario: my motor got too hot the solder on cable A melted and stick on cable B. My car stopped. Smell something burned on esc. Resolder the cable again try to punch the throttle but nothing moved. I turned the motor while punching throttle...it works like normal but dead again when the motor stopped.

I pulled out the sensor cable. It works like nothing happens. Plugged in the sensor cable again...the motor dead again and needs push to work.

Have i shorted the esc sensor board? Any way to recover my esc? Esc is GT2.0Pro.

Thanks.

3 possible problem....but all sensor related. (1) ESC sensor port is bad....(2) bad sensor cable (3) motor sensor board is bad...

Try replace 2 and 3....if not working, then the ESC sensor port is bad.

Solara

10-15-2012 09:18 AM

Quote:

Originally Posted by NPETRO (Post 11319919)

I'm running my 22sct with a 8.5 and would like to know what the diffence between stock 323 and 328 firmware?? I looked back on this thread (20 pages) and did not see anything.....Any help would be appreciated:)

Nick, don't bother....use 428_stock, that is the latest one to use for GT2 PRO ESC

Solara

10-15-2012 09:19 AM

Quote:

Originally Posted by Holly W (Post 11324957)

I just got a reventon s esc and I can't get the computer to recognize it to update the software. I have followed the directions exactly and I still can't get past the "please connect the esc" phase. Any help would be appreciated.

Make sure your fan is unplugged.

Solara

10-15-2012 09:20 AM

Quote:

Originally Posted by 07Forester (Post 11321064)

About an order...

What is your order number..?

07Forester

10-15-2012 09:50 AM

Quote:

Originally Posted by Solara (Post 11327476)

What is your order number..?

5154

adamym

10-15-2012 07:07 PM

Hey you guys, I just got a good run in with the new revonton pro. The esc is awesome. Super smooth and great response. Does anyone know what a typical running temp after 10 min should be running a 10.5 motor?

07Forester

10-16-2012 07:25 AM

Any word guys?

SP Tech

10-16-2012 08:22 AM

Quote:

Originally Posted by 07Forester (Post 11331508)

Any word guys?

I can confirm your order shipped. You have a PM regarding any details.

benz190e

10-16-2012 08:32 AM

question i got an old gt esc without the book or the program box where or how do i get either?

trickedout

10-16-2012 09:10 AM

Quote:

Originally Posted by benz190e (Post 11331740)

question i got an old gt esc without the book or the program box where or how do i get either?

which GT is it? Speedpassion.net has a downloads section at the bottom of their page and it will have manuals and other stuff, you can also get a program box direct from them as well.

Nexus

10-16-2012 10:30 AM

Quote:

Originally Posted by benz190e (Post 11331740)

question i got an old gt esc without the book or the program box where or how do i get either?

Where in IL do you race?

If you are local to me I have the basic programming box you can have. It is not the LCD version, but it's free if you are one of the local tracks I race at.

This version is the one I'm talking about...

http://c456141.r41.cf0.rackcdn.com/i.../spascpb01.jpg

kerby

10-16-2012 01:55 PM

What software and set up do you suggest as a starting point for my Reventon R. Ill be running a 7.5 2wd sc. Small med to low traction

07Forester

10-16-2012 02:10 PM

Quote:

Originally Posted by kerby (Post 11332780)

What software and set up do you suggest as a starting point for my Reventon R. Ill be running a 7.5 2wd sc. Small med to low traction

Also want to know as well.

kerby

10-18-2012 07:08 AM

Quote: