where's my tester esc Derek:confused::blush:;)

yes still testing, i will get one soon!

John I don't think you need the higher torque rotor, though it could be helpful. The stock rotor in the 7.5t is our 12.5mm mod spec, so it already has a moderate torque rotor in it. You could try a higher torque rotor but lets get it running properly as is first :)

what dose the pc link consist of.. my local guy we are trying to get him and his viper 10 squared away but we need to reflash his software.

Weylin, trying to get rod's back on the track! :lol:

well guys here is my delema , i bought a viper 7.5 from amian hobbies a few weeks back after testing the motor a came across a over heating issue which it was taken care of by weylin and i thank him for that , so after looking forward to get my new replacement it shows that i was delivered today by usps to the correct address but no motor in my hands , i contacted weylin about it and by no means i blaming viper-rc on this issue but he couldnt do much about it since there wasnt no insurance on the package or signiture required upon delivery for the package , i often receive packages from amain and absolute and never had package lost so i contacted usps about and now im on a waiting game for someone to call me back about the issue which im pretty sure they are gonna stick to their guns on the fact that it was delivered per tracking number so now im in the lost with 2 motors :flaming:

It is a USB adapter to connect to the Vport on the switch housing just like the ProGauge (but with a computer..). I've been talking with Rod too via email, I'm helping him get it squared away.

Tommy I'm terribly sorry to hear about this issue with USPS, my experience with them has been nearly flawless. I'm still very surprised to hear this account. Please get in touch with your local post office and let me know if you have any luck :sweat:

well i got to 2 choices here either get up first thing in the morning and go to the post office and argue with them or sniper out my postman until he comes by and ask him if in fact he delivered the package like the tracking number says:cry:

ive had something like that happen. said it was delivered.. it was.. to the house down the street that has the same numbers in his address just 2 of them are switched.. so instead of 34 its 43 i get his mail sometimes too.

i have also had one marked out for delivery but then they delivered it the next day with the mail.

i hope that is the case that he still has it in his truck....

Just got my 7.5 viper motor and MMP and I'm experiencing a lot of cogging. Anyone else had this problem and what is the fix. I am running the MMP in sensored mode. Also tried the Viper in another slash 4x4 and still had some cogging. The velineon has a sensor plug in the front of the esc. AAlso tried changing the sensor wire just in case but no luck. Feeling really frustrated with the engine right now:(:(

have you try different gearing since this motors like to be gear higher than others

If it's cogging in two esc's I would look at the sensor board.

I had it geared higher still did same thing only then it was getting too hot

try a different sensor wire.

try a better esc?

MMP in Sensored has problems with a lot of motors smart sence is even worse.