|
Originally Posted by ixlr8nz
(Post 8104883)
Its not relevant anymore as thats very old info, and the starting points that hobbywing suggest on their PDF are very very good(as well as their explanation of everything). I wouldn't even bother reading it.
Mike |
Originally Posted by peter_robinson
(Post 8093952)
Hello,
Where can I buy Hobbywing products? Can you just buy directly from their site? I am looking for the XERUN 1s in Black and the advanced setting box. |
Originally Posted by goos
(Post 8110820)
www.eurorc.com has them in europe seems they are out on the 1s though
|
Which PDF is this refering too?
Cheers
Originally Posted by sosidge
(Post 8102292)
Just wanted to briefly say that I have just installed 518STOCK using the boost settings and gearing for 13.5 with my SP v3 motor that are suggested in HW's pdf.
Ran at two race meetings, one on a 30x16m track, one on a 20x8m track, and lacked nothing in speed or driveability to the competition, with comfortable motor temperatures. Credit to Hobbywing for the software and documentation. |
Originally Posted by xray09ACT
(Post 8114482)
Which PDF is this refering too?
Cheers |
Dear Loyal customers
It has come to my attention that many of you are told that there is new software for 1/10th scale there isnt the only new software update is for 1/8th scale and if there was an update to 1/0th like the 518 and 528 you will be the first to know through email.hobbywing website and rc tech as well as redrc and many more . Please dont ever believe that because sp has some new software out that hobbywing has to, its not the case even though Hw does do sp software it is not recommended for HW esc's for various reasons . thank you for your time regards Angelo |
Originally Posted by BRC
(Post 8101001)
Angelo,
Thanks for the advice... Will try it out and feedback... Hobbywing rocks! Tried this setting with the LRP X12 10.5T Stock Spec... Tone it down 2 steps for for settings for settings 9 and 12... As given was too aggresive... but absolutely smacking!!! HW rules |
Originally Posted by BRC
(Post 8117719)
Angelo,
Tried this setting with the LRP X12 10.5T Stock Spec... Tone it down 2 steps for for settings for settings 9 and 12... As given was too aggresive... but absolutely smacking!!! HW rules regards Angelo |
In use I have found that the Speedpassion 528 Software seems to run cooler on the Xtreme Stock for me on these settings at Maritime Raceway UK.
http://i97.photobucket.com/albums/l2...edsettings.jpg http://i97.photobucket.com/albums/l2...icsettings.jpg On SP 528 the minimum Start RPM is 4500 compared to 3000 on Hobbywing. This was geared at 7.13:1 overall FDR. Just my tuppence. |
Originally Posted by cherry2blost
(Post 8118538)
In use I have found that the Speedpassion 528 Software seems to run cooler on the Xtreme Stock for me on these settings at Maritime Raceway UK.
http://i97.photobucket.com/albums/l2...edsettings.jpg http://i97.photobucket.com/albums/l2...icsettings.jpg On SP 528 the minimum Start RPM is 4500 compared to 3000 on Hobbywing. This was geared at 7.13:1 overall FDR. Just my tuppence. |
Originally Posted by defcone
(Post 8118826)
What turn motor was this with?
|
hobbywing
Hello, I can not update my vario hobbywing, quotes Speedpass does not work, I drive in 10.5, 1 / 12 that can come to my rescue?
-:confused: |
12th scale esc
Hi Guys need help, running a hobbywing Xerun 120 amp 1S lipo esc on a 12th scale car
problem melting neg wire off battery (3.7 ) volt, replaced battery wires from 14g back to 12g but the esc runs very hot. using stock software 518 with the following settings . 9--6 12--7 13--5 14--5 15--5 motor is epic duo 2 10.5 on about 8 degree advance motor not hot any help thanks |
whats the difference between 518 and 528 aside from one being meant for stock and the other for mod?
thanks! |
Originally Posted by the catman
(Post 8122477)
Hi Guys need help, running a hobbywing Xerun 120 amp 1S lipo esc on a 12th scale car
problem melting neg wire off battery (3.7 ) volt, replaced battery wires from 14g back to 12g but the esc runs very hot. using stock software 528 with the following settings . 9--6 12--7 13--5 14--5 15--5 motor is epic duo 2 10.5 on about 8 degree advance motor not hot any help thanks Also you might have a slight problem with the caps as they equalise the voltage of the battery and the esc. But from what i can its a dead short somewhere as that is excessive current flow . |
| All times are GMT -7. It is currently 11:34 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.