Originally Posted by maxepower (Post 12170760)

hey guys,
I got the Hobbywing control box for my XeRun ESC V2.1 but I'm having problems downloading the software on my computer. My windows 7 laptop keep saying it doesn't recognize the RAR file and doesn't know what app to open it with.
Can you help me figure what I'm doing wrong!
Thanks in advance1 :nod:

Originally Posted by TryHard (Post 12150665)

I would strongly suggest dropping the boost end RPM, to closer to 30,000, and adding more of it. 60,000 you'll only ever get close too at the end of the rev range, by which time it's doing diddly squat, as the turbo would have taken over by then (very very very unlikely you'll hit 60,000rpm without getting full throttle basically).

As a good baseline, have a look at the worlds settings from Andy Moore (here) that are up on the Hobbywing site. Very good reference points to use, and what I base my settings on, although need to be a little different due to the rather grunty ProAmps motor's I'm using.

HiH
Ed

Originally Posted by RoyB (Post 12177281)

I have a Hobbywing V2.1 60a esc. When you engage the throttle the motor does not spin.. If you turn the real wheel a little the motor will take off. If you unplug the sensor wire the problem goes away and it acts like an unsensored motor. Have tried 2 different motors and a few different sensor wires. Recalibrated the radio. Nothing seems to fix the problem.
Any suggestions?

Originally Posted by Slotmachine (Post 12177359)

Looks whats coming racers..................
https://sphotos-a.xx.fbcdn.net/hphot...40741229_n.jpg
Paul Rush
HWNA Team Driver

Originally Posted by lewis110 (Post 12177820)

Available T: 3.5, 4.5, 6.5, 8.5, 10.5, 13.5, 17.5, 21.5

Originally Posted by vitomon (Post 12179435)

hi guys,
just curious whats now the latest software version for running modified boosted?? the software names dont make sense. this should really be sorted somehow. i have a v.3.0 speedo and downloaded the latest 3.3 usb software link. i have the options of:

v3.1_121129_beta
v1.1_120918_beta
v1.1_120504

thx for any help

Originally Posted by RoyB (Post 12177281)

I have a Hobbywing V2.1 60a esc. When you engage the throttle the motor does not spin.. If you turn the real wheel a little the motor will take off. If you unplug the sensor wire the problem goes away and it acts like an unsensored motor. Have tried 2 different motors and a few different sensor wires. Recalibrated the radio. Nothing seems to fix the problem.
Any suggestions?

Originally Posted by 2wdrive (Post 12181663)

@cobraracing.

What is the lowest possible timing on the new hobbywing xerun motors? Reason I ask is that the old xerun motors with fixed timing bell work very well in boosted and I don't really want to have more motor timing than that.

The sensorplug on the new motors is not really nicely placed imo. The old motors had the sensor to the side and the new ones goes up which isn't as efficient for sensorwire placement.

Originally Posted by TryHard (Post 12179982)

Latest version is v3.1_121129_beta. I know the names are a little confusing, but the clues are in the name.
Firstly, 'v3.1' refers to the latest software spec, it isn't anything to do with the speedo its suited for. Secondly, the second part of the name is the date, in YYMMDD style.. So it was made on the 29th Nov 2012.

HiH
Ed