|
Originally Posted by JAE
(Post 14505738)
I just bought 2 used 120 amp V3.1 ESC's. I read about some "Stock Braking Issues". Can anyone let me know what these are and have they been fixed? Does the new software update do anything with the v3.1's? I bought these to run stock now, but have flexibility to run mod down the road. Any help much appreciated.
We need to have a track day soon, LRH? Dave |
Originally Posted by RotorTruck
(Post 14505393)
Does the Hobbywing Link software work on Windows10?
I have it installed and working fine on Windows7, and wanted to make sure its ok on 10 before I upgrade the o/s. |
wifi express
Can someone confirm if the following scenario is possible with the wifi express?
You are running on the track - enter the pits - from the rostrum you make connection with the esc and change parameters - you just continue your driving session? In other words: is it possible to go from a 'running esc' into 'programming mode' and go back? WITHOUT you physical touching the esc? |
I tied out the WiFi express with an older Stockspec and 3.1 1s. I could not get it out of programming mode without disconnecting my battery. When I would exit out of the app it would lock the esc. Not sure if the new XR10 is the same as I haven't connected it up yet.
After testing a V3, V3.1 1S, and a V3 Stockspec esc you will need to turn off the esc and then back on after programming. The answer is that you will need to physically touch the esc to program it. |
Hey guys,
I've been trying to use the Wifi Express on my V3.1 speedy. Followed instructions, ie connect to the wifi express via wifi settings on phone, once connected go to the app and tap on the speedy on the top right hand side of the app. When i tap on it it comes up with the message "Please confirm 1. The wifi module is correctly connected.......2. The WLAN on your iphone is connected to HW-Wifilink 3. If the throttle trigger/stick......... Then I press ok and nothing happens. Any help would be appreciated. |
Originally Posted by bee200sx
(Post 14564914)
Hey guys,
I've been trying to use the Wifi Express on my V3.1 speedy. Followed instructions, ie connect to the wifi express via wifi settings on phone, once connected go to the app and tap on the speedy on the top right hand side of the app. When i tap on it it comes up with the message "Please confirm 1. The wifi module is correctly connected.......2. The WLAN on your iphone is connected to HW-Wifilink 3. If the throttle trigger/stick......... Then I press ok and nothing happens. Any help would be appreciated. |
Originally Posted by malkiy
(Post 14566021)
You picked the hobbywing link on the phone's wifi link? You entered the default 12345678 password and changed the password? You will need to relink the wifi on the phone with the new password.
I've tried changing the name of the wifi express via the app but even if i do change it to hobbywing link it doesn't seem to work. |
Originally Posted by bee200sx
(Post 14566494)
well it didnt come up as hobbywing link on my phone when it found it, it came up as wifidefault_soft...... I def know it's this one. Then yes i put the default password 12345678 and it connects.
I've tried changing the name of the wifi express via the app but even if i do change it to hobbywing link it doesn't seem to work. I would send COBRARACING a PM and see if he has any solutions. He is the technical service rep for hobbywing. |
Originally Posted by Madulla
(Post 14559990)
I tied out the WiFi express with an older Stockspec and 3.1 1s. I could not get it out of programming mode without disconnecting my battery. When I would exit out of the app it would lock the esc. Not sure if the new XR10 is the same as I haven't connected it up yet.
After testing a V3, V3.1 1S, and a V3 Stockspec esc you will need to turn off the esc and then back on after programming. The answer is that you will need to physically touch the esc to program it. I also have the XR10 PRO esc. I did not have any issues using the wifi module to change the XR10's settings. I had a blast testing and tuning my esc from the drivers stand after turning a few laps on the track. http://i1149.photobucket.com/albums/...psicqanckh.jpg http://i1149.photobucket.com/albums/...psiemefphz.jpg |
Great to hear that the XR10 works fine. I have one in the box waiting for my new chassis to come.
|
Hw v3.1. Stock spec
Looking to firmware up grades. Looking for something better then stock setup. Class running is 21.5 usgt.
|
Hi Guys there are some new products coming soon secret :) .Id like to know what features you would like with your esc's hardware and software throw me some ideas there are no stupid ideas ok so any thing goes .
|
Originally Posted by COBRARACING
(Post 14591935)
Hi Guys there are some new products coming soon secret :) .Id like to know what features you would like with your esc's hardware and software throw me some ideas there are no stupid ideas ok so any thing goes .
Lightweight, low profile, small footprint, for spec racing |
small foot print and low profile will also mean can only be 60 amp 1s
|
Originally Posted by COBRARACING
(Post 14591935)
Hi Guys there are some new products coming soon secret :) .Id like to know what features you would like with your esc's hardware and software throw me some ideas there are no stupid ideas ok so any thing goes .
http://i1149.photobucket.com/albums/...sjyvx8huq.jpeg Finally, Is the module too fragile to be mounted on an off-road RC? If so then I would love to see some type of protective case.. |
| All times are GMT -7. It is currently 07:18 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.