oki will look at the software later tonight and see what the difference is .John send me an email i have something that can help you get back to the v2 508

Just another quick thumbs up for angelo and his quick service.second to none:D:D:D:D:D:D:D:D

Dont give him too many compliments, I like to keep him on his toes:p:p

Hi

What is the latest Boosted Stock software for a v3?

Cheers

:sneaky:

just bought an Arrma ADX-10 2wd buggy...

What brushless esc and motor combo would be a good set-up to run at my local track as it has to be 17.5t and blnky?? Thanks in advance

I suggest you run a justock esc if your only going to run zero timing the justock can run down to a 8.5T but if your going to run other classes in the future i would go for the v3

Thanks for the kind words but dont say it to loud as ill have nathan reece on my back lol.

There is no way im gonna spend more on just the ESC than i did the car especially when i kno there are lower options...what about the 60a or Xtreme stock and even if i run 2s i can still run the 17.5t, correct?

.

Go for the Xtreme Stock, it's also 60amp but it has a smaller foot print and is lighter than the older 2.1 60amp esc for a smaller price.

http://www.falconsekido.com/products...k-esc-for-1-10 $67.20

Specs:

Dimension: 33mm(L) x 28mm(W) x 31.5mm(H) (Cooling Fan Included)
Cont. / Burst Current: 60A / 380A
Resistance: 0.0006 ohm
Suitable Motor: Sensored and Sensorless Brushless Motors
=>8.5T (1/10 on-road), =>11.5T(1/10 off-road) (Works with 4-6 NiMH or 2S Li-Po),
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 6V/2A Built-in BEC (Linear mode DC-DC regulator)
Cooling Fan Working Voltage:
5V / 0.16A (The fan gets the power supply directly from the built-in BEC)
Suitable Model: 1/10, 1/12 on-road and off -road cars for all STOCK racings
Weight: 46g (Neither cooling fan nor wires includes)

p.s. You'll need the 2in1 lcd programming box and connect it to a pc to load the blinky software into it. Someone where you race more than likely would have one or you can buy one for about $25

Cheers
Rob.

lol i would be very worried nathan isn't exactly a small bloke:eek:he would break your back

Here is my Ezrun Setup! 60MPH / 100KPH ++
 

What a muppet!

Yup, i run the HW SCT Pro and 4700kv set-up in my SCTE and already have the box but wonder about getting another incase i have issues and then im not ordering just the box if something happens to my current one and pay shipping again when i can just get it now...Sounds like the Xtreme stock it may be :tire: