With the soon to be released V3 will we be able to use to the current LCD control box? or will there be new one released? I need to replace my broken one, seeing the V3 will be here soon not sure to buy new one or wait a few weeks.

And that's the whole issue, finding a store in europe who stocks the 120A 1S esc besides racersinexile, good luck finding one....

I didn't went to a HK shop because of the price, pricing is the same after shipping and taxes, but I know the HK shop ships fast and is reliable, much more important imho.

Before cutting off all the HK shops I suggest taking another look at your European dealer network, even when you have a great product people still need to be able to buy it without going through too much trouble.
Otherwise they will wander off to some of the competitors.

+1 ;)

You can find it in France : http://www.wartelle-shop.com/boutiqu...g=lg_fr&num=16

cheers for the info. another one popped up: whats the latest modified software?

I totally understand you but just to let you know as of the 1st of October 2011 we have signed an exclusive agreement with Kyosho de based in Germany they are receiving stock as we speak and if the stores dont stock it you will be able to buy direct from Kyosho de .This will be for the whole of europe if the stores dont want to stock the product thats being offered then Kyosho de will supply it to you .simple i will not play the game of the hobby store oh we can not get the stock .The stock will be there it's up to the hobby store to purchase the product to service it's customers it not up to hobbywing to beg them to stock the product .

The hobby stores need to start thinking about the customer and the customer's needs and the customer support nothing more .

The latest mod software is the 930 which is the same as the 119 but has less sensitivity of the sensor port for less errors that can occur under massive current loads which distorts the signals thus creating an error as the hall sensors lose track were the rotor is positioned at any given time .:nod:

What will be the price then for the V3 in Europe? 160-180eur + shipping 20 eur = cca200eur? :blush:

I found that store but my French is a little rusty. :D

Ok, didn't knew that, that should change things. :)

Good decision

Will make it harder for criminals to copy your product

Will make it easier for customer to buy direct and know product is genuine

Service dealt with in one place

I have been blowing alot of motors (10) since the introduction of V3 software since the new year, and i'm now wondering if this over sensitive sensor port could of been the problem. The motor in question is a GM 10.5 with the larger 12.5mm red ring 1600 guase rotor. I was using various settings, temping every few laps etc, the motors never burnt out as you would expect Ie: melting the plastics etc it was always the windings that blew, would I be right in thinking if the speedo lost track of the rotors position that it could fire at the wrong time and thus cause a sort on the windings?

I'm now running a SP 10.5mmm and have had no problems so far temps are well inside 65c even with more aggressive settings, this motor has the 12.3mm purple ring 1300 gause rotor, so in theory has a lower Kv output that the GM with big rotor.

Is this for boosted mod as well? Thanks for the info. Running an SP 2.0 Pro speedo that I just picked up, and was recommended to use the HW firmware instead of the SP version because it's smoother for mod.

i think the 930 or 119 is standard modified software. the 211 is the stock software for boosted classes and modified boosted if one likes.

So 930 and 119 don't have boost then? Thanks for the info.

try http://www.eurorc.com/product/465/ho...s-v21-dual-bec

EuroRC will also stock the v3 when it comes. EuroRC offers reasonable express shipping which is tracked and the product usually leaves the shop the same or next day.