Originally Posted by InCaRnAtE (Post 10061144)

We run open esc :sneaky:, i have a crc genx 1/12 scale with the rears starting at 42mm.

Really just looking for the optimum setting for the esc.

Thanks again

Originally Posted by olly986 (Post 10061519)

I don't think the Xtreme stock can take that low of motor

Originally Posted by Fabricio (Post 10061667)

olly, looking at the manual now it says 8.5, but it is not clear in which mode, I know that I can used modified and stock program on it, but it still not clear that to me.
Thinking maybe of getting a Xerun, it accepts 3.5T.

Originally Posted by olly986 (Post 10062215)

I wouldn't chance the Xtrem with a mod that low, mine's a Xerun 120A but if you can wait a little, get the new V3 that looks to be out early 2012.

Originally Posted by Fabricio (Post 10062258)

Yes I agree, I am going to wait for the new V3, as it can handle lower turns motors.
But I am really happy with the Xtreme, most of the superstock (how we call here) are using it.

Originally Posted by COBRARACING (Post 10062417)

The xtreme stock can run to a low turn of 5.5T motor no turbo (and i mean no turbo) 8.5T and above with turbo .

Originally Posted by olly986 (Post 10061533)

ok, give me a list of all your default set-up to work things out.

Originally Posted by snowman_evil (Post 7335802)

Can anyone tell me if you can use the Speed passion LCD programming box to program the Xerun 120amp ESC?

Originally Posted by olly986 (Post 10062452)

I guess you need to really know how to set your speedo and fdr with a 5.5t or is it safe enough with no turbo Angelo?

Originally Posted by oXYnary (Post 10063615)

You can but fwiw you need the 1.37 SP software to first update the 2in1 Programming box. Then you can update the programming box to the Hobbywing latest version. You need such as otherwise when you use the Hobbywing updated esc firmware, you get a "Update Programming box" message when attempting to program the esc alone with the box. 1.36 versions 2n1 firmware is an off number from the Hobbywing version, so the Hobbywing software wont let you update. The 1.37 SP version has a newer 2n1 firmware that matches one of the older Hobbywing, so then you can update.

Originally Posted by COBRARACING (Post 10060547)

Does the esc load the software when you have the programmer and the pc all connected together do you get any options on the pc usb link which you can change the settings on the pc itself ?

If not i can see your problem from mixing and trying to match sp and hw you have corrupted the factory flash rom settings and it does blink green or sometimes a solid green which mean factory settings have been erased .If thats the case the esc needs to be returned to factory for restting and loading of factory settings .

Originally Posted by ysyracing (Post 10064760)

Hello, I need your help to solve a problem.
The problem arrives when to too different ESC, HW XERUN-120A-1S-SD (V2.1) and SP GT2.1 ProStock, I tried to change the SW. Both had the SW 211Stock and I have changed by the SW 205Mod using the Link Application SW from HW V1.64 and the Advanced Professional LCD Program Box of HW.
It seems that it is correctly updated then I disconnect the ESC, I disconnect the LCD from the computer and I connect again the ESC to check with the LCD that the parameters have been correctly loaded.
Here starts the problem. The LCD is connected but it doesn’t detect any SW of the ESC and the ESC starts to emit green flashes each 1 second with intervals of 2 seconds.
I connect the LCD to the computer and start the Link Application and it not connect with the ESC Electro. It recognises the LCD and I can update it without problem.

Thank you for your help.
JoseLu



Thanks for your fast reply Angelo and olly986.
Angelo, the answer for your question is, no.
My doubt is, Why has ocurred when I has used one ESC XERUN-120A-1S-SD (V2.1) with Advanced Professional LCD Program Box of HW and Link Application SW from HW V1.64?
What have I done wrong?

Thank´s you for your help,
JoseLu

Originally Posted by COBRARACING (Post 10064367)

If you download the usb link 1.64 which is the latest and run 930 stock or 930 mod it has been upgraded with the new 1s lipo protection cutoff

The v3 508 no timing will be upgraded with the 1s cut off after new year .

thanks guys :)