|
Originally Posted by Mike-Xray
(Post 9600690)
hobbywing 211 or speedpassion that updated in may on their website?? i've got an xtreme stock hobbywing ESC!! where can i found the latest software for hobbwing? which are the best program running on 17.5t? sorry guys but i'm really new to eletric on road
|
Originally Posted by olly986
(Post 9600841)
211/213 are the latest version, use HW for HW and SP for SP do not mix them.
|
Originally Posted by Dragonfire
(Post 9600863)
I was under the impression you could mix firmware between the different ESC's with no problems.
|
Originally Posted by defcone
(Post 9601031)
Yes you can. Have had no problems whatsoever.
|
Originally Posted by defcone
(Post 9601031)
Yes you can. Have had no problems whatsoever.
|
Originally Posted by Dragonfire
(Post 9601047)
So how do you go about updating the firmware on your ESC to another brand? I assume you just hook it up, load brand x software and go to firmware screen? Or is there a special trick to it?
|
Originally Posted by Dragonfire
(Post 9601047)
So how do you go about updating the firmware on your ESC to another brand? I assume you just hook it up, load brand x software and go to firmware screen? Or is there a special trick to it?
|
Originally Posted by olly986
(Post 9601055)
You need to load the sp link software etc..update your 2 in 1 box with SP and then your speedo with whichever program you want, then enter the values.
Originally Posted by defcone
(Post 9601065)
If you want to load the sp software (323) and you have hobbywing(211), you have to go to an older software, say 205_MOD on the hobbywing. Then open the speed passion software and upgrade to 323. Simple really.
Originally Posted by olly986
(Post 9601052)
I did not say you couldn't, but it is recommended by Angelo and HW not to use SP software and vice versa, which are not exactly the same, after you do whatever you want, it will work, but it is complicated enough to follow the software of one company, so two...
|
Originally Posted by Dragonfire
(Post 9601090)
If the processor is the same it should work fine.
Has anyone tried this with the Orion software (onto SP ESC to be specific) yet? |
i am now using sp 323 software on a spgt2pro. can i change settings with the hobbywing program box? or do i have to update anything.
|
Originally Posted by defcone
(Post 9601130)
Yes I tried, it doesn't work.
|
Originally Posted by vitomon
(Post 9601198)
i am now using sp 323 software on a spgt2pro. can i change settings with the hobbywing program box? or do i have to update anything.
Originally Posted by Dragonfire
(Post 9601210)
Sl I guess they have updated the hardware with the new hobbywing based stuff. Will it interface at all or just won't upgrade frmware?
|
GOOD! The drivers here are the products used HOBBY WING!
HOBBY WING products and services is very good! ! ! |
Can the XERUN 120A run on 1S for 1/12th with booster? Does it allow for 1s lipo cut-off?
Thanks. |
I getting a bit lost on how different motors perform, has anyone have any suggestions on a good base setup and gear ratio for a mediun size outdoor track for the HW 21.5 in a TC
At the moment I'm running the Xtreeme Stock on 518 with the DRRS on 9, start at 3000rpm, boost at 21 deg, turbo max and ramp at 250 at a 5.1 ratio. Temps are around 70deg but its a lap and a half down on pace from the Graupner motor (RIP) I was using. Any help appreciated |
| All times are GMT -7. It is currently 07:02 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.