4LikesNEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
08-29-2011, 03:21 AM
#6046
21.5 SETTINGS
Really need help with settings for 21.5t
I have tried 4 different setups from people for 21.5t but it killed 2 motors. 1 SP MMM 21.5t motor that was at 58 deg and a team powers motors that overheated in 3 mins with the same settings.
both times the motor was slow and the run before hand had really low temps in the 30's.
my FDR was 6.3 to 6.6
Thanks for the help in advance.
I have tried 4 different setups from people for 21.5t but it killed 2 motors. 1 SP MMM 21.5t motor that was at 58 deg and a team powers motors that overheated in 3 mins with the same settings.
both times the motor was slow and the run before hand had really low temps in the 30's.
my FDR was 6.3 to 6.6
Thanks for the help in advance.
Looking back at what happened on the weekend and notes back at work. Start with the FDR at approx 6.3 but run the BOOST timing at 36 Deg, TURBO timing at 24 Deg. Stay at 18 for TURBO slope ramp. DRRS at 8.
BOOST start RPM at 6000, BOOST timing at 450 and TURBO delay at .4. This will be a safe start point.
From here play with the BOOST start RPM and Boost timing Acc in small steps and keep temping....
Cheers Ren
08-29-2011, 06:12 AM
#6048
08-29-2011, 06:30 AM
#6049
Tech Adept
stock timing on 1s?
Can you load all the latest stuff on the 1s Angelo and would you know what a 1s weighs?
08-29-2011, 10:17 AM
#6050
I have the Ezrun 150A Pro V2 the black one is there any need to update the firm ware in that >
08-29-2011, 10:34 AM
#6051
On a side note, I don't know why so many people cook their motors. Ever heard of a temp gun. "I cooked my motor, switched it out to another and cooked that one"??? Temp every minute after you make changes to make sure its not overheating. Then you will know if you can complete a run without burning anything up.
08-29-2011, 12:20 PM
#6052
Hi I have been running the 21.5 in the STCC this year. I have mainly used the Corally motor as the alternative wind generates fair more torque. However you can use the settings off my website as a starting point:- ( http://www.stockracer.co.uk/hobbywing.html ) The Corally motors are very delicate so these settings should be pretty gentle on other style of motors
Really need help with settings for 21.5t
I have tried 4 different setups from people for 21.5t but it killed 2 motors. 1 SP MMM 21.5t motor that was at 58 deg and a team powers motors that overheated in 3 mins with the same settings.
both times the motor was slow and the run before hand had really low temps in the 30's.
my FDR was 6.3 to 6.6
Thanks for the help in advance.
I have tried 4 different setups from people for 21.5t but it killed 2 motors. 1 SP MMM 21.5t motor that was at 58 deg and a team powers motors that overheated in 3 mins with the same settings.
both times the motor was slow and the run before hand had really low temps in the 30's.
my FDR was 6.3 to 6.6
Thanks for the help in advance.
08-29-2011, 02:52 PM
#6053
Tech Fanatic
08-29-2011, 07:15 PM
#6055
08-30-2011, 12:18 AM
#6056
Tech Fanatic
mine is a 64, maybe this is the problem...
Someone said above that you could not update to certain version, which one do you have, it will help to know to answer you
08-30-2011, 12:40 AM
#6057
This is the ESC i cant find it on Hobbywing website why is that
08-30-2011, 01:08 AM
#6058
Tech Adept
lrp x11 13.5T
hi guys,
you have any ideas of good setup for an LRP x11 13.5T motor? what software to use and what settings. i am new to the speedo and software djungle. any help appreciated!
greets
v
you have any ideas of good setup for an LRP x11 13.5T motor? what software to use and what settings. i am new to the speedo and software djungle. any help appreciated!
greets
v
08-30-2011, 01:52 AM
#6059
Tech Fanatic
http://www.rcecho.com/hobbywing-ezru...a-esc-1-8.html
This is the ESC i cant find it on Hobbywing website why is that
This is the ESC i cant find it on Hobbywing website why is that
it looks like this one (on HW site) no?
http://www.hobbywing.com/english/Art...?ArticleID=429
The one you have, if it is from the site you gave us is coming from Hong-Kong, can it be a copy Angelo??
Last edited by olly986; 08-30-2011 at 02:05 AM.
08-30-2011, 02:11 AM
#6060
Something like that, and go from there....