R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE (https://www.rctech.net/forum/radio-electronics/393690-new-hobbywing-stock-supercharged-software.html)

sg1 08-25-2011 06:26 AM

Cobra,
You have a PM.
Thanks,
Wayne

scoop 08-25-2011 06:36 AM


Originally Posted by mcdoogle (Post 9571643)
i have already tried that :cry: Also the X12 has virtually no brakes :mad:

Hey!? The brakes on the extreme are really good. When you put 211 on your esc did you reset the points, as in neutral, throttle and brake? Do you have brake and reverse set at 100%?

sg1 08-25-2011 12:16 PM

Does anyone have a link for the 508 firmware?

Thanks!

scoyle 08-25-2011 01:35 PM


Originally Posted by olly986 (Post 9568932)
Try this with 211 and a fdr of 7.4-7.6, do you run the TC6 like Alan? you could also put a little drag brake if you feel it will help your driving style (15-20) and motor on 0 timing to start, eventually moving up gently to see if you feel a difference, total of boost, turbo and motor is 64 on 211, you have a total of 75 on 119 (and I do not know what is on your motor) if I recal it will stop at 60 with 119 automatically.
I am not familiar with the HPI, it looks like a nice motor, what is the most popular motor in Ballymoney?

Give my regards to Alan, I know him since he started 1/10th buggy, he was a little snippet at the time:lol:

Thanks for that... I am a team driver for HB with the TCX. I really like the feel of the HPI, nice amount of torque and acceleration as well as good temps.

Al is definitely having a good year this year - has made the BRCA in mod every event this year. He is loving the TC6 and he puts a lot of work in.

What's your real name and I will pass on your regards.

Stephen

olly986 08-25-2011 02:42 PM

Olivier, they were not too many French racing the RCCAOI, the last time I saw him was at the Munster indoor grand prix a few years back now.

hope the software will work for you, this motor is not on our legal list here in France, this is why I do not know it.

olly986 08-25-2011 02:44 PM


Originally Posted by sg1 (Post 9573154)
Does anyone have a link for the 508 firmware?

Thanks!

You will find it on this page, with all the other software.

http://www.rctech.net/forum/electric...ings-only.html

rahzip 08-25-2011 03:29 PM

I must be missing something..... I cannot find the "supercharged" settings. Nor, the 119 firmware.
I must not be doing something right.

I have the 2n1 program box and the ESC I am using is the XERUN-150A-SD. The following is in the program box
USB link V1.63,
hardware ver. HW310 V1.0
software ver. V1.07 110119
additional choices are V1.07 101224 and V1.07 100516
data base ver. 1.17

I have tried to upgrade from the hobbywing software screen and the above is what I get.

Can some try to help me:confused:

M7H 08-25-2011 03:37 PM


Originally Posted by rahzip (Post 9573847)
I am using is the XERUN-150A-SD.

For the 150a ESC there are only 3 firmwares available, the "supercharged" setting are not (yet) available for the big 150A ESC.....

Bappe 08-25-2011 05:20 PM

what gearing should i start with on a hobbywing 8.5t motor in touring? would 7.0 be a good start?

small carpet track, dont think i`ll be needing any turbo/boost

NTS 08-26-2011 12:47 AM


Originally Posted by mcdoogle (Post 9571643)
i have already tried that :cry: Also the X12 has virtually no brakes :mad:

I have the same experience, weak brakes on X12 13.5 but not great on Novak SS 13.5 either. I find that if I run the reverse setting at 100% I get a delay before the brakes come on from high speed. I have tried most of the setting end point suggestions etc. but none seem to make any difference.

Benzaah 08-26-2011 01:06 AM


Originally Posted by NTS (Post 9575669)
I have the same experience, weak brakes on X12 13.5 but not great on Novak SS 13.5 either. I find that if I run the reverse setting at 100% I get a delay before the brakes come on from high speed. I have tried most of the setting end point suggestions etc. but none seem to make any difference.

If you are running 100% on the transmitter and 100% on the speedy i would bet a fiver that you are actually locking up the brakes making you think you have none. Are you flat spotting your tyres at all?

I am at 100% on the speedy and around 80 to 90% on the transmitter depending on gearing that im running and i have Zero issues with brakes here...

COBRARACING 08-26-2011 03:43 AM

Hi Guys

beware of this seller on ebay all products are 100% counterfeit save yourself the heart ache and the loss of funds.

http://www.ebay.com/itm/EZRUN-COMBO-...62629897609782

regards Angelo

COBRARACING 08-26-2011 03:47 AM


Originally Posted by rahzip (Post 9573847)
I must be missing something..... I cannot find the "supercharged" settings. Nor, the 119 firmware.
I must not be doing something right.

I have the 2n1 program box and the ESC I am using is the XERUN-150A-SD. The following is in the program box
USB link V1.63,
hardware ver. HW310 V1.0
software ver. V1.07 110119
additional choices are V1.07 101224 and V1.07 100516
data base ver. 1.17

I have tried to upgrade from the hobbywing software screen and the above is what I get.

Can some try to help me:confused:

M7H is correct there is no turbo function available for 1/8th scale esc's

olly986 08-26-2011 04:39 AM

Hi Angelo

I sent you an Email but got no response about batteries?

J SiN 08-26-2011 05:54 AM

Anyone have a base setup for a Speed Passion 3.0 MMM 21.5t and a Xtremestock?

Even a starting FDR would be great aswell.


All times are GMT -7. It is currently 08:15 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.