I reckon put your motor timing back on 0 first, I assume -3.5 ticks is from the center?

Boost Ramp
 

Have a FW suggestion for the Boost Ramp. I normally run 100RPM/Step, but I would like to see 75 RPM/step, and 125RPM/Step added to a future version.



Cheers,
Shawn.

Does Hobbywing sell a brushless motor that is around 48mm in length or less? I want to use it in an old corally pancar but the room is not enough to fit a normal size brushless motor. Sensorless is ok as well, as long as it is 48mm or less in length.

Yes yes.

Team Powers make a superlite motor and is 6mm shorter overall with the same diameter, 10.5 and 13.5 winds

Team Powers UK sell the motors

hey Mate,

thanks alot for these setting once it turns dry again i will try these out and see how they go.

We run @ Penrith Every Monday night along as its not raining or some Public Holidays. we run atm Mini and 17.5 we can always run another class as long as we get enough entries. if you want more information let me know via PM.

I have an XRAY T3'11 I am running outdoors on a medium sized track. 150ft straight, running a Trinity Duo3 17.5

I need some help with the settings, what do you guys recommend?

Thanks
Grant

Thanks, i read that they made a shorter motor but thought i asked here as well. I don't know what a shorter rotor does performance wise but it seems it is the only motor that will fit without dremeling the pod.

Hi

I have been using my HW Xtreme stock for a couple of weeks now and its been awesome !

I had a issue with it at the weekend though that cost me a couple of heats and wondered if anyone had the same issues or knows of a cure ?

I turned the speedo on as normal for my heat put it down and ran it for 20yds to the line. When i set of the car was really really slow as if there was either no timing on the speedo or it had dropped into sensorless mode.
Both times this happened i had my pitman turn the speedo off then on and everything was fine again ?

It is not just me having these issues as a fellow HW runner was having the same issues !

Anyone got a cure ( i know i could just turn the car off and on again) or having the same issues ?

Mark

That happened to me and I swapped out the motor sensor and it was fine after that.

Here is a good starting point....

17.5 duo 3 standard timing
ddrs 5
boost timing 40
turbo slope 18
turbo timing 25
start rpm 4000
turbo delay 0.1s
timing acc 300

fdr 5.7-5.9
hobby wing 211 stock software

Make sure you temp it after 2-3mins and make sure it doesn't get too hot.

I agree with swapping the sensor lead first for sure my I had the same fault and it turned out to be the sensor in the motor I was using, changed that worked perfect! :)

nice idea shawn... :nod:

Had exact same issue a week or two back, switched sensor lead and all sweet again. Had a pretty good side on hit the previous race.

Either sensor cable,sensor connector on motor/esc or the sensor board on the motor.