NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
#1696
Tech Apprentice
Hi all,
I would like to know how to use the Xerun 1S... In 1S configuration.
For the moment, for make it work, I must disable the lipo protection, if not, the green led blink(under or over voltage indication).
Of course, for the first set, I use a 7.4V lipo.
Thanks.
I would like to know how to use the Xerun 1S... In 1S configuration.
For the moment, for make it work, I must disable the lipo protection, if not, the green led blink(under or over voltage indication).
Of course, for the first set, I use a 7.4V lipo.
Thanks.
#1697
Tech Adept
What motor matches this speedo best thanks
#1698
#1700
may ii know if the software cn be use on just stock esc?
#1702
Hi, Just want to know what is the latest Firmware for HW120A?
Mine is for Software is
HW USB Link V1.62
Esc Hardware version HW427_V1.0
Esc SoftWare is V2.0_100528
2in 1 Program box Software is V1.06_100512
Hardware is HW310 V1.0
Is the the latest??Or is there most latest?
Nedd to know
Thnks
Mine is for Software is
HW USB Link V1.62
Esc Hardware version HW427_V1.0
Esc SoftWare is V2.0_100528
2in 1 Program box Software is V1.06_100512
Hardware is HW310 V1.0
Is the the latest??Or is there most latest?
Nedd to know
Thnks
#1703
Tech Champion
iTrader: (30)
for anyone running off road- here is the set up I have been using lately with the 120a and 60a in a 2wd car and truck with a 13.5 HW motor
1- forward/brake
2-3.0 cutoff
3- 30% drag brake (i like alot)
4- DRRS - 7
5- brake force - 100%
6- reverse force- 25%
7- initial brake - 20%
8- neutral 6%
9- timing 22.5*
10- over hear enable
12- turbo - 6
13- RPM - 7500
14 delay .4
15- punch -4
1- forward/brake
2-3.0 cutoff
3- 30% drag brake (i like alot)
4- DRRS - 7
5- brake force - 100%
6- reverse force- 25%
7- initial brake - 20%
8- neutral 6%
9- timing 22.5*
10- over hear enable
12- turbo - 6
13- RPM - 7500
14 delay .4
15- punch -4
#1705
Thnks nikos2002
#1706
for anyone running off road- here is the set up I have been using lately with the 120a and 60a in a 2wd car and truck with a 13.5 HW motor
1- forward/brake
2-3.0 cutoff
3- 30% drag brake (i like alot)
4- DRRS - 7
5- brake force - 100%
6- reverse force- 25%
7- initial brake - 20%
8- neutral 6%
9- timing 22.5*
10- over hear enable
12- turbo - 6
13- RPM - 7500
14 delay .4
15- punch -4
1- forward/brake
2-3.0 cutoff
3- 30% drag brake (i like alot)
4- DRRS - 7
5- brake force - 100%
6- reverse force- 25%
7- initial brake - 20%
8- neutral 6%
9- timing 22.5*
10- over hear enable
12- turbo - 6
13- RPM - 7500
14 delay .4
15- punch -4
Would you care to post your setup for your 8.5t 4wd buggy ?
#1707
Tech Apprentice
No one can help me?
#1708
#1709
#1710
The only Speed controllers manufactured by HW for SP is the GT series thats all we have no link to the citrix series .From what i know only a few samples were made for SP with the citrix and thats about it .
So please any SP customers who need support we can only support the older style SP and the GT series thats all and the only reason why we will help with support is because we are hobbiests ourselves and we know how it feels not to have some sort of tech support .
thank you for your time .
So please any SP customers who need support we can only support the older style SP and the GT series thats all and the only reason why we will help with support is because we are hobbiests ourselves and we know how it feels not to have some sort of tech support .
thank you for your time .