people at speed passion cant wait any longer with the new rpm log esc firmware, is it ready?
Here newpeople cant wait any longer, and switch to gm genius caused it has every thing including rpm log. And some of them taking novak cause it has the temp log,
we keep loosing customer, for these features.

To me it seems to be a problem with your battery .Have you tried a different battery .

As for the esc going to sensoreless mode and that causing it to slow down doesnt seem right as there is no such thing i have heard it many times from people on this site but believe doesnt make sence .

The sensor wire basically is there to make sure the esc knows where the rotor is at any given time to produce 100% power to a single phase may it be A,B or C thats all .were the sensorless unit works by producing 100% to two phases as it has no hall sensors to know ehere the rotor position is thats all .

When a sensor wire is out it will not slow the car down but make it cog when is starts up thats all that could also be caused by phase A shorted mosfets nothing else .

The Capacitor network is used to equalise the battery voltage to the esc and not allow the battery to increase also there board protects from voltage spikes and radio interference .

So i suggest you have a careful look at your battery .

let me know how you go

regards ANgelo

Dear Sir

We are not speed passion just an oem designer and manufacturer for sp now if sp wants a rpm log then they must ask for it to be designed and programmed .

No one is losing customers as customers look for performance and reliabiltity.
and thats excatly what hobbywing offers .

The rpm log will be introduced in time .

thank you for your support

regards ANgelo

but that would including hobbywing that we sold, since we present both, but they keep looking for gm an novak, instead of tekin, can you help us?

Still at it huh...

c'mon didn't you want it either for your gt2.0, support is needed, and this had been promises by the sp owner mr. Wilson for sept , but they keep delaying this one.

If you have not noticed alot of things have been delayed with companies restructuring and the economy in the toilet. What once was planned may not seem like a worth wild venture now. Sounds like just being greedy to me no matter how much comes out we still want more. Like kids just never satisfied.

not greedy, but finding customer satisfaction, any way, rpm log should be old fashion if come to late, .. Since rpm log firmware is easier to build rather than supercharge or dmts, and rpm log firmware is the vestigial of those supercharge and dmts. Im just telling the truth. Def.

Sir if it is so easy to build then become a business man build it and sell it..... Sounds like a great idea to me glad you thought of it..:sneaky:

1s 17.5 setup
 

Hi all,
Sorry if my question has already been answered but I didn't see it. Just got a 120a 1s version speed control and am running it in 12th scale with a 17.5 LRP x-12 motor. A fellow racer was nice enough to help me out and has it running pretty quickly but I was interested to see what some other 17.5 guys are using for settings for comparison.

Thanks,
Chuck

Is this the latest motor from HW? Looking for a 13.5T motor

Got this from the HW website ... just that, am not sure if the site is up to date ...

Attachment 660894

can you post this pix again as am unable to enlarge the 2 setup screens ... many thanks

How do I install an esc power cap? I assume I just solder it to the battery leads, but I wanna make sure.

I have also seen pictures of a grey version which does not have holes.

That is wilsons problem not mine or hobbywings .I have been helping speed passion customers now for over 6 months with technical help which im not oblidged to but i did it as i love r/c and love helping people .

If wilson has promised you this software please chase him it has nothing to do with hobbywing or myself .

I will still support the Sp guys with tech support but to be honest i dont have to as im part of hobbywing not sp .

If you have a problem with sp send them an email and chase them for what you need .

if sp doesnt support there customers with tech support you have two choices send them an email and demand the help or switch brands nothing else you can do .A product with no support is worthless