![]() |
Originally Posted by aaron125
(Post 10045706)
One rx can have as many model memory positions as the tx supports, 30.:nod: You can have all of the memories in use by one rx or 30 rx's.:tire::tire: As far as I know, there is no limit to either the number of rx being bound to a tx or the number of memory positions in use by an rx. By that I mean you can have multiple rx's bound to the same memory position, but obviously, only one rx can be used at a time.
Hi aaron 125 Blinking wished i'd known that i would have bought 2!!!!!!!!!! I'm on 4 with one more fo xmas from the missus... At £70-80 each thats a lot of money For a top end radio such as this it could be more detailed in the instruction book !!!! :flaming::flaming::flaming::cry: That price is for the 451 not the R My 451r was £95 !!!!!!!!!!!!!!! Still cant afford sr servo at the minute |
Originally Posted by justchris
(Post 10046048)
Hi aaron 125
Blinking wished i'd known that i would have bought 2!!!!!!!!!! I'm on 4 with one more fo xmas from the missus... At £70-80 each thats a lot of money For a top end radio such as this it could be more detailed in the instruction book !!!! :flaming::flaming::flaming::cry: That price is for the 451 not the R My 451r was £95 !!!!!!!!!!!!!!! Still cant afford sr servo at the minute |
Originally Posted by sidecarphil1
(Post 10046089)
Hey try the border RC shop in Holland , the RX451 and the RX451r are the same price €95 this crosses over to 75 squids(plus shipping) AND michel the owner is a cool guy ;););)
Nice one sidecar Its not the money as such (way too many models) it just seemed a bit wrong of sanwa's instructions not to make this more obvious. But imo still the beat radio/rec combination. Also this thread is so good forgot about the display switch the other day a quick look in here job done. Model 3 bound to receiver.......... Nice to see the 451 & 451r the same price though bearing in mind you need a sr servo from sanwa to get the full potential of the 451r................ |
I have a 94931 servo and 92451 receiver for sale, maybe check it out? Thanks!
http://www.rctech.net/forum/r-c-item...rvo-setup.html :) |
Originally Posted by justchris
(Post 10046048)
Hi aaron 125
Blinking wished i'd known that i would have bought 2!!!!!!!!!! I'm on 4 with one more fo xmas from the missus... At £70-80 each thats a lot of money For a top end radio such as this it could be more detailed in the instruction book !!!! :flaming::flaming::flaming::cry: That price is for the 451 not the R My 451r was £95 !!!!!!!!!!!!!!! Still cant afford sr servo at the minute |
3 Attachment(s)
Just recieved my wrap from nxgraphics and thought I would show it off. I sent him a pic of my paint scheme and he came up with this and in a few hours and $45 later it was in the mail. If your interested just send him a email it's crazy what he can do! Anything!
[email protected] |
Originally Posted by jbmccoy205
(Post 10051302)
Just recieved my wrap from nxgraphics and thought I would show it off. I sent him a pic of my paint scheme and he came up with this and in a few hours and $45 later it was in the mail. If your interested just send him a email it's crazy what he can do! Anything!
[email protected] |
Ye man, I have to admit that even though it's something I'd never do to my own M11x, or any radio (just isn't my cup of tea) but that wrap sure does look pretty sweet.:nod: And the colour matching to the paint-work on the cars is an added bonus.:cool::tire:
|
Hi arron 125
This is what i want to try http://demonpowerproducts.co.uk/prod...l-servo-p-6607 I run tc mostly and i wold like to use the sanwa combination i've watched the thread and i must admitt they are dear.(only use savox due to price,spec,and build) but it would be nice to use the super fast response rate!!!!!!!!!!!!!!!!!!! I wonder though if i would notice any difference as the m11x is so quick anyway ????? |
Absolutely you will not notice anything at all, let alone an improvement or increase to the servo speed. Hitec, Savox and KO all have servos capable of 0.06s transit times, with the Savox and especially the KO RSx servos having absolute bucketloads of torque.:cool:
As you said, the M11x is already by far the fastest radio on the market and when combined with a sub 0.07s servo, would you really even want anything faster, if it were even possible?:eek: Ever wonder why neither Sanwa nor Airtronics are keen to mention ANY specifics regarding the servo speed increase with SSR?:weird: That's because it's all a load of crap and they know it, hence the lack of any actual, real-world (or even dreamland figures) numbers, objectively stating by how much the servo speed would increase. Not even for their very own servos. Just a marketing rip off which does nothing.:nod::lol: |
For those of you running lipos, do you wait until the alarm sounds at 6.6v or do you like to recharge at a certain voltage/battery indicator. I have more than 10 hours on my 2300mah lipo and it's the first time I've seen the battery indicator lower than 100%.
|
I'd say that would depend on the individual user. Bit of a strange way of doing things though. It would be like not filling up the petrol tank in your full-size car until the fuel light turns on and the petrol gauge is reading empty. Certainly not the wisest way it could be done.
I usually charge my 2300mAh LiPo about every 10-12 hours of on-time. Every time I recharge the battery, I always reset the on-time usage meter so I know exactly how long I have been using the TX/battery since recharging.:nod: This way, I know I will definitely 100% never run out of batteries while at a race as I've tested my battery and can get minimum 17+ hours without the LCD backlight or at least 12 hours if the backlight is left on constantly. Since I have it set to 20 seconds when driving, I know that if I recharge at 10-12 hours, I have at least another 3-4+ hours of charge in the battery if needed. Remember too, that LiPo and LiFe batteries absolutely hate being discharged too far or anything below 30% capacity.:eek: Also, not only does it not benefit the battery to discharge it, both types of batteries will actually last longer, give more consistent discharge curves and allow for more charge/discharge cycles if they are recharged often. If I can be bothered, I'll actually charge my TX pack after every day of use and same for the LiFe RX pack I use.;) |
Hey guys
HELP ME PLEASE I have just bought a new reciever for my M11x , it is the RX451r , BUT it wont power up , it is brand new (not 2nd hand) and i put it into my TF6 turn on the speedo (Speed passion GT2.0) and transmitter and i get no blue light Tried binding , nothing , swapped speedo's nothing , swapped recievers to one of m old RX451's and the car works ....... Please dont tell me my new reciever is screwed , waited 3 weeks for it to come into stock at my local hobby shop ;-( |
Originally Posted by sidecarphil1
(Post 10077080)
Hey guys
HELP ME PLEASE I have just bought a new reciever for my M11x , it is the RX451r , BUT it wont power up , it is brand new (not 2nd hand) and i put it into my TF6 turn on the speedo (Speed passion GT2.0) and transmitter and i get no blue light Tried binding , nothing , swapped speedo's nothing , swapped recievers to one of m old RX451's and the car works ....... Please dont tell me my new reciever is screwed , waited 3 weeks for it to come into stock at my local hobby shop ;-( Thanks guys haha Merry Christmas all |
;) Hi everyone,
The timer feature (length of run/on time) How do you reset this, have had a look through the thread cant seem to see any info. :confused: |
| All times are GMT -7. It is currently 11:04 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.