R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   FlySky Noble NB4 (https://www.rctech.net/forum/radio-electronics/1042635-flysky-noble-nb4.html)

simple 10-15-2024 12:01 PM


Originally Posted by dr_hfuhuhurr (Post 16134838)
Classic vs Enhanced Binding
I see that different receivers correspond to either Classic or Enhanced binding. From reading the manual, the only difference I can se is with enhanced you can use dual-receiver mode. Any other differences?

Can't seen to find anything more in the thread or manual.

You just need to know the magic words. The Enhanced receivers allow expanded flexibility with servo frequency.
See the manual section 7.6 of the Noble +
or check out this post
https://www.rctech.net/forum/showpos...postcount=1502

dr_hfuhuhurr 10-15-2024 12:21 PM


Originally Posted by simple (Post 16134874)
You just need to know the magic words. The Enhanced receivers allow expanded flexibility with servo frequency.
See the manual section 7.6 of the Noble +
or check out this post
https://www.rctech.net/forum/showpos...postcount=1502

Really interesting, so Ican set the frequency to match the servo I'm using
So if I bought one of the PowerHD servo's (thinking the S15 possibly), I would set it to 333hz (https://www.chd.hk/Product_Detail.aspx?id=188)
If I was using the Sanwa PGS-LH II SSR servo, I'd need to figure out what frequency that is or probably use the digital servo option.

All of this is to ensure the best possible response time and minimize latency.

Roelof 10-15-2024 12:35 PM


Originally Posted by dr_hfuhuhurr (Post 16134878)
Really interesting, so Ican set the frequency to match the servo I'm using
So if I bought one of the PowerHD servo's (thinking the S15 possibly), I would set it to 333hz (https://www.chd.hk/Product_Detail.aspx?id=188)
If I was using the Sanwa PGS-LH II SSR servo, I'd need to figure out what frequency that is or probably use the digital servo option.

All of this is to ensure the best possible response time and minimize latency.

Not sure if the Flysky supports SSR but I did see SR was mentioned.

SSR has a 384 Hz frequency but the center pulse width is 300 usec while all normal servo's have a 1.5 msec center pulse width. SR is using a 760 usec center pulse width and can handle up to 833 Hz.

HazyTank 10-17-2024 02:43 AM

Hey pal, What scale should these be printed at on a Cricut as they are showing as over 2 metres in size for me? Thanks

Crimcyan 11-11-2024 08:33 AM

Thinking of picking up a pro+ for racing, how does it stack up against a sanwa m17 or ixsr? Currently running a spektrum dx4s so any of them would be a huge upgrade

mbrienzo 11-11-2024 10:00 AM


Originally Posted by Crimcyan (Post 16142331)
Thinking of picking up a pro+ for racing, how does it stack up against a sanwa m17 or ixsr? Currently running a spektrum dx4s so any of them would be a huge upgrade

I just made the switch from the M17 to Pro+ this weekend and have no regrets. If I was buying new because I didn't have one or the other I would get the Noble just because of features and feel.

I didnt do any speed tests between the 2 radios but my results from the races say it was a good decision.

Crimcyan 11-11-2024 11:47 AM


Originally Posted by mbrienzo (Post 16142366)
I just made the switch from the M17 to Pro+ this weekend and have no regrets. If I was buying new because I didn't have one or the other I would get the Noble just because of features and feel.

I didnt do any speed tests between the 2 radios but my results from the races say it was a good decision.

thanks for the info, I was talking to someone and they said the quality is no whete near the same as thier mt44 or m17. Is that true? I held the noble and it felt really solid just a bit heavy

Mac The Knife 11-11-2024 12:28 PM

The extra heft is probably due to the extra battery in the base,,,, which is removable. As for quality? I put my Noble 4 over the spektrum radio I was using,

mbrienzo 11-11-2024 01:13 PM


Originally Posted by Crimcyan (Post 16142424)
thanks for the info, I was talking to someone and they said the quality is no whete near the same as thier mt44 or m17. Is that true? I held the noble and it felt really solid just a bit heavy

I would say the quality feel is above an MT44 or M17. The case is mostly metal, most likely aluminum where the Sanwa radios are all plastic.

The Noble is heavier in hand but feels balanced.

Crimcyan 11-11-2024 02:20 PM

Thanks for the input, I'm thinking I'll go with one once black friday gets closer if there are any deals. Is the pro plus really worth it over the base plus?
I see the pro only has the ultra fast, which I would probably use since I dont need a whole lot channels for racing

mbrienzo 11-11-2024 05:35 PM


Originally Posted by Crimcyan (Post 16142487)
Thanks for the input, I'm thinking I'll go with one once black friday gets closer if there are any deals. Is the pro plus really worth it over the base plus?
I see the pro only has the ultra fast, which I would probably use since I dont need a whole lot channels for racing

That's a decision you will have to make. I got the pro for the case, wireless charging capability, cooler looking main display and seen a video where it said the pro has faster throttle response.

jnyrcr 11-13-2024 06:14 PM


Originally Posted by mbrienzo (Post 16142563)
That's a decision you will have to make. I got the pro for the case, wireless charging capability, cooler looking main display and seen a video where it said the pro has faster throttle response.

I believe the speed is the same for both of them.

mbrienzo 11-14-2024 05:35 AM


Originally Posted by jnyrcr (Post 16143210)
I believe the speed is the same for both of them.

This is the video where it states the Pro+ has a more sensitive trigger(at 17:40). I do not know if it's true, but that's what I was referring to.


elex300 11-14-2024 06:31 AM

What is the difference between the plus and the pro plus? Thx

Mac The Knife 11-14-2024 06:48 AM


Originally Posted by elex300 (Post 16143300)
What is the difference between the plus and the pro plus? Thx

https://www.rctech.net/forum/showpos...postcount=1755


All times are GMT -7. It is currently 11:53 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.