OS TR engine thread
#136
Tech Adept
Thats an LD3 in the picture jrabbito....
#137
Ahh yes. OFNA is doing quite a good job copying the design....
#138
Tech Adept
Copying the design ?? An LD3 is an LD3 and an NTC3 is an NTC3 Lot's more stuff to adjust on an LD3 and lots more thats done different....it's not like the NTC3 & LD3 parts are interchangable
Back on topic my new 12TR is ready to be broken in Only mod so far is the optional OS Speed Hyper Head. I like the TR's, had one in my Reflex for a couple seasons and it pulled that tank around our tight track real well
Here's a pic...
Back on topic my new 12TR is ready to be broken in Only mod so far is the optional OS Speed Hyper Head. I like the TR's, had one in my Reflex for a couple seasons and it pulled that tank around our tight track real well
Here's a pic...
Last edited by SteveG; 07-06-2004 at 01:18 AM.
#139
nice pic
#140
Tech Rookie
I just ordered one of the OS R-spec motors from my LHS. Based on the promising posts, OS reputation and the fact I did not want to dish-out $250+ I am hoping this is a winner!!!
Since this is my first Nitro I hope we can keep some dialog going for tuning this new motor. BTW, my LHS confirmed the 7/15 arrival of the R-spec. at the distributor (7/18 to me, hopefully).
Since this is my first Nitro I hope we can keep some dialog going for tuning this new motor. BTW, my LHS confirmed the 7/15 arrival of the R-spec. at the distributor (7/18 to me, hopefully).
#141
Super Moderator
iTrader: (239)
Originally posted by a68cougar
I just ordered one of the OS R-spec motors from my LHS. Based on the promising posts, OS reputation and the fact I did not want to dish-out $250+ I am hoping this is a winner!!!
Since this is my first Nitro I hope we can keep some dialog going for tuning this new motor. BTW, my LHS confirmed the 7/15 arrival of the R-spec. at the distributor (7/18 to me, hopefully).
I just ordered one of the OS R-spec motors from my LHS. Based on the promising posts, OS reputation and the fact I did not want to dish-out $250+ I am hoping this is a winner!!!
Since this is my first Nitro I hope we can keep some dialog going for tuning this new motor. BTW, my LHS confirmed the 7/15 arrival of the R-spec. at the distributor (7/18 to me, hopefully).
#142
TR Rspec
Does the TR-Rspec comes in 5 port turbo version as well?
#144
Tech Adept
Originally posted by j240z
Do you have a source for that pipe? I'd like to give it a try. Thanks
Do you have a source for that pipe? I'd like to give it a try. Thanks
Might want to try Reid RC Performance....they carry the Mielke line
#145
Hi Guys,
I thought I would post here also. I am selling my OS TR Turbo .12 motor for $150.00 Canadian.
I have used it in 3 races only and never bashed. Its in great shape.
Cheers,
John
[email protected]
I thought I would post here also. I am selling my OS TR Turbo .12 motor for $150.00 Canadian.
I have used it in 3 races only and never bashed. Its in great shape.
Cheers,
John
[email protected]
#146
Super Moderator
iTrader: (239)
Originally posted by jrabbito
Hi Guys,
I thought I would post here also. I am selling my OS TR Turbo .12 motor for $150.00 Canadian.
I have used it in 3 races only and never bashed. Its in great shape.
Cheers,
John
[email protected]
Hi Guys,
I thought I would post here also. I am selling my OS TR Turbo .12 motor for $150.00 Canadian.
I have used it in 3 races only and never bashed. Its in great shape.
Cheers,
John
[email protected]
#150
Regional Moderator
iTrader: (9)
Hey guys...
I'm really interested in the 12 TR R-Spec. I ran a 12 TR last year but wanted more power this year so I turned to Sirio. It ran well at first, but I've been having multiple problems with it lately. So when I saw this new 12 TR R-Spec in RCCA's Inside Scoop, I thought I would look into it more.
Problem is, I can't find any hp or rpm specs on it. Not in the Inside Scoop listing, not in Towerhobbies listing and not even on OS's website. Anybody got the confirmed HP and RPM stats on this new mill?
I'd love to switch back to OS if they can get me anywhere near my current Sirio's 1.45hp @ 39,000rpm.
Thanks in advance for any info. I'm ready to buy now if the numbers are right!
I'm really interested in the 12 TR R-Spec. I ran a 12 TR last year but wanted more power this year so I turned to Sirio. It ran well at first, but I've been having multiple problems with it lately. So when I saw this new 12 TR R-Spec in RCCA's Inside Scoop, I thought I would look into it more.
Problem is, I can't find any hp or rpm specs on it. Not in the Inside Scoop listing, not in Towerhobbies listing and not even on OS's website. Anybody got the confirmed HP and RPM stats on this new mill?
I'd love to switch back to OS if they can get me anywhere near my current Sirio's 1.45hp @ 39,000rpm.
Thanks in advance for any info. I'm ready to buy now if the numbers are right!