R/C Tech Forums - Novarossi engines thread

I would be very much appreciate if anyone would provide me the follow information what is the rear bearing size for the following engines:-

1) Nova 35 plus 21 Tuned : Ceramic Rear : 14.5 x ? x ?
2) Nova Kangaroo 2007 : Rear Bearing : Size 14 x ? x ?
3) Both Engine Front Should b the same but size ? x ? x ?

wingracer

07-22-2008 06:31 PM

Quote:

Originally Posted by fatboy (Post 4663852)

I would be very much appreciate if anyone would provide me the follow information what is the rear bearing size for the following engines:-

1) Nova 35 plus 21 Tuned : Ceramic Rear : Size ?
2) Nova Kangaroo 2007 : Rear Bearing : Size ?
3) Both Engine Front Should b the same but size ??

35 plus 21 rear bearing:

http://tkocompetitiondev.com/shop/pr...roducts_id=361

This is the one for the R1WC kangaroo. Not sure if the 2007 version uses this or the bigger one above:

http://tkocompetitiondev.com/shop/pr...roducts_id=206

Front bearing:

http://tkocompetitiondev.com/shop/pr...roducts_id=156

mcsquish

07-27-2008 08:03 PM

Quote:

Originally Posted by NinjaRacer (Post 4544503)

Whats better a Novarossi 353 Race or a Picco JLReddot Evo 3?

Not sure if you're still looking for an answer, but I have been running a Reddot Evo 3 Modified and have decided to go back to Novarossi...........

Quote:

Originally Posted by GHETTOTEACHER (Post 4572337)

I have a question.

Is there a huge difference between the tuned 353 vs the stock 353 ?

Let me know what you think.

Did you get an answer? I'm going to order one tomorrow.

FG101C

07-29-2008 10:10 AM

Quick question. should I be running a JP-1 pipe on a 528x r or will that cause tuning problems. Tuning problems are what I'm having, everything is sealed up nice and I do have a pretty good grasp on tuning. Just wondering if the JP-1 is too much low end tune and causing issues. I will try another pipe but it's the pipe that came stock with the Hyper ST PRO and not sure how good it is either.

Thanks for any input.

speedy2

07-29-2008 10:50 AM

I run a JP Fx B5t with normal plug
+ Jp1 and 13/44 ratio
and on the straight nobody is quicker bottom
and I must go off the throttle at the end or the buggy will take off..

suntok2

07-29-2008 07:42 PM

Quote:

Originally Posted by FG101C (Post 4685417)

How many shim does your engine have?

David Day

07-30-2008 10:14 AM

What pipe should be ran with the Nova P5XS for maximum performance?

Will the OFNA 086 work?

wingracer

07-30-2008 11:24 AM

086 is a great choice for any Nova based motor.

David Day

07-30-2008 11:38 AM

Awesome, Thank you ;)

motojon

07-30-2008 04:19 PM

Help..I Have a JP engine that is being tempermental. the bottom end will run intermitantly rich during a qual or a main, so we then have to lean the top end down to get it to run good and the temps are way high. i just agrrevating:flaming: ill have it running real good pull in take a piss and then go back out and itll run fat on the bottom end

Riketsu

08-04-2008 09:29 PM

Can someone tell me how many shims do I need for a Novarossi 353 and a 12-3SCT if I use 20% fuel???

Roniel_R

08-05-2008 06:58 AM

Quote:

Originally Posted by Riketsu (Post 4707701)

Can someone tell me how many shims do I need for a Novarossi 353 and a 12-3SCT if I use 20% fuel???

You will need to have .40 in total...

Riketsu

08-05-2008 07:12 AM

Quote: