R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Onroad Nitro Engine Zone (https://www.rctech.net/forum/onroad-nitro-engine-zone-71/)
-   -   Novarossi engines thread (https://www.rctech.net/forum/onroad-nitro-engine-zone/29453-novarossi-engines-thread.html)

keavze 06-26-2008 11:20 PM

do the new nova engines come with a carb with insulator at the neck?

stefan 06-27-2008 01:57 AM


Originally Posted by TOMJR (Post 4578987)
Which is the best pipe to go with the 353 engine ?

The 2630 is a rpm pipe, if you get a good one. They seem to vary in quality.
The 2602 is a better all around pipe IMHO. It gives you more torque and better midrange but you loose a few rpm's.

Most people here like the 2602 better.

GREGORY! 06-27-2008 03:12 AM

how can someone understant if he has a good one?

silverM3 06-27-2008 04:50 PM

novarossi 367
 
what is the plus2? how is it better than before? plz share your experience. I am considering getting one.

NitroWD 06-29-2008 05:19 PM


Originally Posted by BLKNOTCH (Post 4562066)
I will let you know what I think next weekend as I have a new NS12TS1 which I have just broken in ujsing Josh Cryles method, I also have an O.S. .12 TZ so I will run them both next weekend and let you know what I find is better.

Sean

hi sean, any feedbacks? :D

Bad Mika 07-08-2008 06:14 AM

novarossi 353 plus 2
 
hi, if the race i'm attending does not restrict me to a 5.2mm pipe and can go 'outlaw', which pipe should i consider to match with the 353 plus2 engine ?

thanks in advance :nod:

automator 07-09-2008 11:49 AM


Originally Posted by stefan (Post 4581282)
The 2630 is a rpm pipe, if you get a good one. They seem to vary in quality.
The 2602 is a better all around pipe IMHO. It gives you more torque and better midrange but you loose a few rpm's.

Most people here like the 2602 better.

What about pipes for .21 onroad engines? All I hear about is the 2015, what are other options and the attributes of those pipes compared to each other. Or is the 2015 "the" pipe?

wingracer 07-09-2008 12:51 PM


Originally Posted by Bad Mika (Post 4614664)
hi, if the race i'm attending does not restrict me to a 5.2mm pipe and can go 'outlaw', which pipe should i consider to match with the 353 plus2 engine ?

thanks in advance :nod:

I would go with whatever the latest and greatest Nova pipe is and if you don't care about rules just drill out the stinger a bit.

wingracer 07-09-2008 12:53 PM


Originally Posted by automator (Post 4619466)
What about pipes for .21 onroad engines? All I hear about is the 2015, what are other options and the attributes of those pipes compared to each other. Or is the 2015 "the" pipe?

Well, the 2015 is an excellent all around pipe. If you want to try something different try out a Sirio or RB 2013. Sounds different, looks different, runs great.

automator 07-10-2008 05:25 AM

Is there a 2052 pipe or something like that? How does that pipe compare to the 2015 or 2013?

Alambrito 07-10-2008 03:37 PM

Someone tried to Efra 2604 Rb in this engine 353??

Bad Mika 07-11-2008 06:40 AM

pipes
 
hi, anyone can enlighten what is the difference between the 2601 pipe, 2607 pipe and the 2620 pipe ? :flaming:

am more familiar with 2630 and 51607 pipes..:nod:

thanks in advance..:p

automator 07-11-2008 10:04 AM

Lots of pipe questions...where are the experts at? :cool:

MHarrison 07-11-2008 05:34 PM


Originally Posted by Bad Mika (Post 4626045)
hi, anyone can enlighten what is the difference between the 2601 pipe, 2607 pipe and the 2620 pipe ? :flaming:

am more familiar with 2630 and 51607 pipes..:nod:

thanks in advance..:p

The 2601 pipe is a good all round pipe ( very similar to the 2602 )good low,mid & top end With best fuel mileage,the 2620 is gonna give you a little more top end over the 2601. the 2607 is a picco based pipe..if you have created a header to fit a nova motor its gonna give you alot more bottom But I find it very flat from mid to high RPMs. It does however work great on the picco motors..but again not on long straights. hope this helps

stefan 07-12-2008 12:14 AM


Originally Posted by GREGORY! (Post 4581371)
how can someone understant if he has a good one?

When your engine runs good, you got a good one. If everybody else with the same engine / pipe combo passes you, you got a bad one.

Easy actually, ain't it? :)


All times are GMT -7. It is currently 01:52 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.