Hey guys
Ive got a couple Nova virtus .21 for the truck and plus.21-4bttwc/a for the buggy all being factory tuned. Anyone have any pointers or obvious blunders that i should know? Ive had REDS for years and managed to get quite a knowledge about them. I know with the newer carbs, its kind of like tuning an os, but in reverse.

Any input would be awesome, and of course greatly appreciated!

Thanks again guys
Zach

Hey guys
Ive got a couple Nova virtus .21 for the truck and plus.21-4bttwc/a for the buggy all being factory tuned. Anyone have any pointers or obvious blunders that i should know? Ive had REDS for years and managed to get quite a knowledge about them. I know with the newer carbs, its kind of like tuning an os, but in reverse.

Any input would be awesome, and of course greatly appreciated!

Thanks again guys
Zach

another pipe question, what is the performance difference between the nova 9886 and 9853 also nova 41021 and 41019.. top end ? low end ?fuel mileage? to be used on nova 21 5port 7mm carb restrictor thanks

this is crazy:

http://www.amazon.de/Novarossi-72301...ords=Novarossi

i already informed the german distri about that.

sold and shipped by amazon.de (germany) for a lot under "general street prices".

Considering a P5 xlt for Nitro Buggy, Can some one tell me what pipe and plug going to run 30%

either a Go 2072 (hard to get) a 9886 a werks 2058 on the P5

nova 2096/41001 is a very good combo for p5. 41001 for bottom end, 2096 for speed in the straight. Works a charm.

Thanks for the info guys, What plug? What kind of run times am I looking @?

Er8sr, in buggy I like the 9901/41021 combination. This setup has good bottom end but a little short on the straight. The 2096 is butter smooth, almost to smooth at times but gives the motor more top. I used a 41021 manifold with both combos. You should be able to get 10 minutes per tank in buggy pretty easy. That is with either pipe. As for plugs I like Odonnell 97t's. Good luck.

Pipes
 

For smaller tracks or tough to clear jumps I like the 9853ss 41001
For everything else 9886 41001 or werks 2058 with stock header.

Thanks great info..

And a Mugen MSR 1005 if you can find one.

Listed price is $20 cheaper than the price at AMain. $20 is not a lot.

Distributor give a retail price but hoppy shop can sell cheaper, hobby shop always have competition so up to buyer to decide

the day i made this post above, this engine was at 250€ !

i made a screenshot, a friend of me got it for that price.
30 min. after he bought it, they increased the price to 473!

and now its sold and mailed by a shop not amazon anymore...