R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   NOVAROSSI Engine thread.... (https://www.rctech.net/forum/offroad-nitro-engine-forum/353301-novarossi-engine-thread.html)

xc7 12-03-2012 05:15 PM


Originally Posted by Losimoe (Post 11511527)
who sells novarossi roma piston sleeve rod set. i need a replacement. mine ingested dirt and i check, there's a few scratches on the inside of the sleeve. it wouldn't idle very well now.

i tried looking for it but cant seem to find one.

We've got 3 in stock :nod: :D

http://clockworkracingengines.com/co...25-nov08500-25

Email me [email protected] if you need a price using DHL next day air as the site will choose the slower method first.

Eivind E 12-03-2012 07:28 PM

Earlier I was running a 21-4C which after while was so low on compression that it kept going rich and dying all the time. So I swapped it out for a newer one which has very good compression.
However, the old spent one seemed to produce a lot more power. Low down and high speed as well, what could this be down to?
Would it be that the one which had spent all it's compression would be able to rev more? It seems strange to me that the newer engine is so much more of a slouch.

kgombe 12-03-2012 07:49 PM

did it seem to produce more power even at the end of its life??? maybe try to clean the pipe or try a new pipe and header on it.. when i say clean i meant the inside not the outside.. both pipe and header...

and how much fuel do you have through it

houston 12-03-2012 07:55 PM

they are always fastest before they go bad ;)

PERROTTO 12-03-2012 08:24 PM


Originally Posted by Eivind E (Post 11512767)
Earlier I was running a 21-4C which after while was so low on compression that it kept going rich and dying all the time. So I swapped it out for a newer one which has very good compression.
However, the old spent one seemed to produce a lot more power. Low down and high speed as well, what could this be down to?
Would it be that the one which had spent all it's compression would be able to rev more? It seems strange to me that the newer engine is so much more of a slouch.

A true comparison between 2 engines that are exactly the same would be most accurate when compression is the same as well.

Also don't forget that the p4c, p4c team, and p4 btt are different engines.

Mark K 12-04-2012 06:45 PM

I have a question, I was thinking about getting a Bonito in the spring to put in my RC8T. The last engine I had in it was a OS 21 XZB stock. It ran real well with the OS, but I was looking for a little more power. How does the Bonito match up stock for stock with the OS? Will It have more bottom torque? How does the top end compare? There is a big price difference between the two engines. I guess the main question is will I see a big difference in performance between the 2 engines?

Thanks.

Motorman007 12-05-2012 04:52 AM

What is a Beat Nova Rossi?? http://www.neobuggy.net/modules/news/

Lee running a Beat Nova Rossi I like what he said about not having that on off feel. Anyone have any info on this motor? Is it a 3 port 4 port 5 port?

aussies1129 12-05-2012 05:50 AM

ok looking for a matchup between these two engines bonito/roma in a mbx6tr
probably be using a 9856/4001 or 21 pipeset:)
cheers

Maximo 12-05-2012 06:22 AM


Originally Posted by aussies1129 (Post 11518079)
ok looking for a matchup between these two engines bonito/roma in a mbx6tr
probably be using a 9856/4001 or 21 pipeset:)
cheers

9886/41001...even 9853/41001 is OK..............The 41021 tones the power and RPM down over the 41001

Bernarossi 12-05-2012 10:05 AM


Originally Posted by Motorman007 (Post 11517980)
What is a Beat Nova Rossi?? http://www.neobuggy.net/modules/news/

Lee running a Beat Nova Rossi I like what he said about not having that on off feel. Anyone have any info on this motor? Is it a 3 port 4 port 5 port?


I was trying to figure out the same thing. 4 port for sure. Modded by someone called BEAT? Look at the sticker on the wing.

http://gallery.neobuggy.net/2012Race...0835&k=WTw9dh8

Also did anyone else notice that Boots was running 2 different engines?

Bonito
http://gallery.neobuggy.net/2012Race...6552&k=G65X5Xd

http://gallery.neobuggy.net/2012Race...7116&k=v2QDKHK

aussies1129 12-05-2012 01:21 PM


Originally Posted by Maximo (Post 11518167)
9886/41001...even 9853/41001 is OK..............The 41021 tones the power and RPM down over the 41001

Sorry Neil I should of worded that a bit better
I was after a matchup between the Roma and bonito
Running on a mbx6tr how do they compare with power through the range and run time I am trying to make a division, I already have the Roma but looking at a bonito for 2013 or maybe stick with another Roma :confused:
Cheers

blade954 12-05-2012 02:23 PM


Originally Posted by Bernarossi (Post 11518892)
I was trying to figure out the same thing. 4 port for sure. Modded by someone called BEAT? Look at the sticker on the wing.

http://gallery.neobuggy.net/2012Race...0835&k=WTw9dh8

Also did anyone else notice that Boots was running 2 different engines?

Bonito
http://gallery.neobuggy.net/2012Race...6552&k=G65X5Xd

http://gallery.neobuggy.net/2012Race...7116&k=v2QDKHK

Maybe he was chasing grip changing from the Bonito to the BTT maybe...

Deckman 12-05-2012 05:11 PM


Originally Posted by blade954 (Post 11519755)
Maybe he was chasing grip changing from the Bonito to the BTT maybe...

It appears to Say B4 Plus on the head

houston 12-05-2012 07:59 PM

kinda funny how EVERY novarossi engine at worlds is using a 41021 or 41029 header isnt it? ;)

aussies1129 12-05-2012 08:04 PM


Originally Posted by houston (Post 11520929)
kinda funny how EVERY novarossi engine at worlds is using a 41021 or 41029 header isnt it? ;)

Directive from novarossi:confused:


All times are GMT -7. It is currently 09:13 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.