|
oops made a mistake...
|
Originally Posted by BigNasty
(Post 12807483)
Monty, you and your dad should pack a guitar for tent city. ... nitro jam! See you soon
|
Monty, also, Joey is building and running the show for the Silverstate in Vegas this year, that should be good with a Joey track. 4/10-4/13, flyer to come soon.
|
:D
more fusion x engines just arrived ! |
Originally Posted by PERROTTO
(Post 12807000)
The peopl that are laughing at your engine obviously do not care/know how much more beneficial it is to have the larger cooling head. So let's laugh at them for a moment...hahahaha hahahaha.:D
Seriously though, I am not a fan of the lower cooling heads, they simply do not work as well but no scratches on the head would be the only plus. As the old saying goes, Function over form.
Originally Posted by Lille-bror
(Post 11268317)
Hi all.
Here is my Team engine - now a lot lighter and lowered CG. The original Novarossi head weighs 103 gram. The head from my HPI Pro F3.5 HPI part #101589 weighs 72 gram and is lowered a lot (7 mm lower than the Novarossi head). The 4 screw holes have the same position, so why not put the HPI head on my Nova? All it tooked was a little bit of grinding on the Nova house. VOILA the worlds first NOPI engine! :D Life is simple! http://farm9.staticflickr.com/8309/8...46b61c25_z.jpg http://farm9.staticflickr.com/8039/8...eef1cae7_z.jpg http://farm9.staticflickr.com/8454/8...c007c012_z.jpg http://farm9.staticflickr.com/8320/8...cee42a23_z.jpg http://farm9.staticflickr.com/8180/8...bd1ea086_z.jpg |
Drive train magic
Despite the fact I have worked on every aspect of my vehicles so many times I cannot remember, there is one thing they do I cannot wrap my head around. When sitting on the bump box I will start one wheel turning to listen to my drivetrain. The part I do not get is this; once all four wheels are spinning if I stop one wheel ( eg. grab hold of the right rear wheel) but keep the drivetrain turning, the wheel on the wheel on the opposite corner of the vehicle stops too. Since the drive train is still spinning, how does it do that?
|
Originally Posted by Lille-bror
(Post 12811916)
I still run my HPI head on my Plus4 engines. No problems even through the summer time
I remember when you did that head mod, pretty sweet even if it does say "HPI". :) |
it's what's on the inside that counts
|
Hey guys , I got a few plus 21-4 btts engines new in box on special
lmk if youre interested |
Merry Christmas Monty, to your family also. Maybe some business we'll shall do this upcoming year. We shall see...
Keep the shiney side up!!!:D :tire::tire::tire::tire: |
Originally Posted by sschultz
(Post 12840081)
Merry Christmas Monty, to your family also. Maybe some business we'll shall do this upcoming year. We shall see...
Keep the shiney side up!!!:D :tire::tire::tire::tire: just lmk if and when the time comes Shane |
Merry Christmas everyone!
|
Hey guys , I got a few plus 21-4 btts engines new in box on special
monty do you still have these on special and how much also on a piston sleeve set for my 21-4 part number 08002 there are some that say 08002 11 will those work and what is the difference
|
Originally Posted by bbridge1970
(Post 12867820)
monty do you still have these on special and how much also on a piston sleeve set for my 21-4 part number 08002 there are some that say 08002 11 will those work and what is the difference
|
Monty. What's happening bud? You still alive??
I'm looking to make a comeback and need a couple engines. I'd like to support someone that is somewhat local to me. Let me know what you can do for me on a plus 21-4 btts and a fusion x please. Fusion x a good truggy engine? What's the run time like? Thanks. Pm prices if you like. U still doing the nct's? How's the turn outs been the past couple years? Thanks agin and talk to you later. |
| All times are GMT -7. It is currently 09:05 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.